Seven Practical Skills for optimizing Linux system hard drive (1)

In Windows, disk fragmentation is a common problem. If you do not pay attention to it, the system performance may be eroded. Linux uses the second extended File System (ext2), which processes file storage in a completely different way. Linux does not have the problem found in Windows systems, which makes many people think that disk fragmentation is not a problem at all. However, this is incorrect ...... In Windows, disk fragmentation is a common problem. If you do not pay attention to it, the system performance may be eroded. Linux uses the second extended File System (ext2), which processes file storage in a completely different way. Linux does not have the problem found in Windows systems, which makes many people think that disk fragmentation is not a problem at all. However, this is incorrect.

All file systems tend to be fragmented over time. Linux file systems reduce fragmentation, but they are not eliminated. Because it does not often appear, it may not be a problem for a single-user workstation. However, in busy servers, file fragmentation will reduce hard disk performance over time. Hard Disk performance can only be noticed when data is read or written from the hard disk. The following are some specific measures to optimize the hard disk performance of Linux.

I. Clear Disks

This method looks simple: Clear the disk drive, delete unnecessary files, and clear all files that need to be saved but will not be used. If possible, clear unnecessary directories and reduce the number of subdirectories. These suggestions seem obvious, but you will be surprised to find that each disk has accumulated a lot of garbage. Releasing disk space can help the system work better.

Ii. Sort disk fragments

The disk fragment program on Linux is different from that on Windows 98 or Windows NT. Windows 98 introduces the FAT 32 file system, although running Windows 98 does not have to be converted to a FAT 32 file system. Windows can be set to use FAT or an enhanced file system called NTFS. All these file systems process file storage in essentially the same way.

In Linux, the best way to clear disk fragments is to make a full backup, reformat the partition, and restore the file from the backup. When files are stored, they are written to contiguous blocks without fragmentation. This is a big job. It may be unnecessary for program partitions that do not change frequently like/usr, but it can create a miracle in the/home partition of a multi-user system. It takes the same time as the disk fragmentation of the Windows NT Server.

If the disk performance is still unsatisfactory, there are many other steps to consider, but any hardware solution that includes upgrading or purchasing new devices may be expensive.

3. upgrade from IDE To SCSI

If your hard disk is an IDE drive, you can upgrade it to the SCSI drive for better overall performance. Because the IDE controller must access the CPU, CPU and disk-intensive operations may become very slow. The SCSI controller does not need to process read/write through the CPU. When the IDE drive is reading or writing, the user may complain about the slow system because the CPU cycle is occupied by the IDE drive.

Get faster controllers and disk drives

Standard SCSI controllers cannot read and write data faster than standard IDE controllers, but some very fast "UltraWide" SCSI controllers can make a real leap in read and write speed.

The EIDE and UDMA controllers are very fast IDE controllers. The new UDMA controller can speed up to the SCSI controller. The top-level speed of the UDMA controller is the burst speed, but the continuous transmission speed is much slower. The IDE controller, including UDMA, is embedded in the drive itself. You do not need to buy a controller. You only need to buy a drive, which includes the Controller to achieve UDMA performance.

Disk drives often overlook the speed of disks. The disk speed is measured in rpm, which indicates how many times a disk is rotated per minute. The larger the rpm, the faster the disk speed. If you have a budget for this, most server system vendors can provide 7500rpm or even 10000 rpm SCSI disks. Standard SCSI and IDE disks provide 5400rpm speed.