Several reasons of entering PE blue screen

A PE on the blue screen, this situation is not often encountered, what is the cause of this? After testing in dozens of computers, summed up the following several common reasons for everyone to share.

Reason 1:

◇ Error Analysis: Windows cannot access system partitions or boot volumes during startup. Typically occurs the first time after a motherboard is replaced, primarily because the IDE controller for the new motherboard and the old motherboard uses a different chipset. Sometimes it can be caused by a virus or a hard drive injury.

◇ solution: Usually just use the installation CD to start the computer, and then perform a repair installation can solve the problem. For viruses, you can use the DOS version of the Anti-Virus software to kill (have Kv2005dos version download). If there is a problem with the hard disk itself, install it on a different computer, and then use "CHKDSK/R" to check for and repair disk errors.

Reason 2:

Please confirm that the PE system contains the driver files for the basic computer hardware

Reason 3:

Hardware error displayed by c000007b

Should be related to the compatibility mode of your hard drive interface you just need to go into the BIOS set up the compatibility mode of the hard drive interface should be able to solve the problem should be changed to SATA mode you might as well try it, just set the BIOS should be OK

Of course, in addition to these three reasons there are other factors, the computer store will continue to join the website.