| [Lattice machine] Enter * #7370 # in standby mode. QD automatically completes the following three steps.
That is, restart the mobile phone → format drive C → restore the system backup of drive Z to drive C.
Before starting the lattice machine, the screen will display a prompt for entering the lock code (this is the last prompt before your lattice machine. It will be too late if you choose to confirm it ), if you have not changed the lock code, the default value is 12345. Enter it to continue. The server will probably be completed within several minutes!
After the lattice machine, the C drive has only the system. The eight options in the front of the menu and their options are retained, because they are internal components of the system, all input methods except self-installation will also be retained, and friends of the first lattice machine will not need but will lose something.
All registration information, personal settings, and information in the name folder will be cleared, and the shortcut key function for line change will be canceled.
In short, everything lostProgramCan be installed again, these programs are also easy to find on the Internet.
Note! It is best to meet the following requirements for re-indexing!
1. Ensure that the battery power is sufficient for the grid machine. If the Grid Machine is powered off, the consequences will make you very troublesome.
2. Back up your name folder on your mobile phone and store it on the Elastic Block Storage (edisk.
3. Delete all programs in the "treasure chest", and delete all programs in "program management", text message inbox and text message communication records! (If you have installed a font, change the name of the fonts file package on drive C and delete it)
4. Remove the MMC expansion card from your mobile phone!
5. If the system on drive C contains the fonts file package, rename it and delete it! [Geka] Method 1 [cell phone card]: Go to the menu on the mobile phone, choose tool 2, choose storage card 3, and click 4 (select format storage card on the left soft key), and click 5 to exit.
Note: There are a lot of options to choose from when you reach step 1, which can be understood literally (all operations on the mmccard ).
Method 2 [computer card]: 1. Press the power-off key. 2. Select "Fetch the memory card". 3. on the screen, when you are prompted to fetch the card, remove the mmccard from the mobile phone. 4. Insert the card into the card reader. 5. Connect it to the USB interface on the computer. → 6. On the "removable disk" displayed on the computer, right click '7 → click "format" → 8. On the displayed panel, change "FAT32" to "fat" (The mmccard is not for the first time, you can select quick format) → 9 Click OK to start the card → after the 10-card feature is completed, create five new packages on the mmccard, namely, "images-others-sounds-system-Videos ". Two more sounds packages are required: "digital" and "simple"
Note: The method is slow and unsafe. If there are many files or errors on the card, the card will often fail and prompt that the card is damaged. Method 2 is fast and there will be no errors, unless the mmccard is really damaged. However, a computer and a card reader are required. [Bell] QD only recognizes three kinds of ringtones: WAV, Midi, MAR, and Mar. It is rare to use special software for conversion. Therefore, it is not commonly used, and WAV and Midi can be downloaded anywhere on the Internet, these two files are usually used!
Wav ringtone storage address: mmccard \ Sounds \ digital
MIDI ringtone storage address: mmccard \ Sounds \ simple
In fact, it can be stored in either of the two packages. When you change the ringtone, qd will automatically search for the two packages, the WAV Files and MIDI files in the two packages, as well as the QD built-in ringtones, are displayed at the same time. The files on the mmccard are added with a small icon after the file name, if there is no icon at the end of the window, the QD will bring a bell.
When you modify the incoming call ringtone, you can set it in "scene mode" and "card holder! [Ringtone management] Recently, many friends asked if they could delete the ringtones from the original factory of the mobile phone. The answer is no, because the original factory ringtones were not copied to the drive C of the mobile phone for users to use at the factory or cell phone, instead, it directly uses the ringtones on the Z drive, and everyone knows that the "Z" drive cannot be changed.
Next we will teach you how to manage your cell phone ringtones. It is very simple to add "Aaa-" to the name of the Midi ringtones you have downloaded and add "Zzz-" to the name of the wav ringtones -", in this way, when you are browsing the ringtones, Your midi ringtones will be automatically arranged on the frontend side, and the wav files will be arranged on the last side.
This is because QD mobile phones sort file names by English letters, so ...... While QD supports loop search when browsing the ringtone file, although the wav file is arranged at the end, you only need to search up to quickly find the wav file.
That is to say, if three "a" and three "Z" are added to the front of the Midi and WAV file names, your MIDI files and WAV Files are closely tied together. [Image] The image is generally in JPEG format. QD is stored in the images package of the mmccard by default. In fact, the image can be stored anywhere on the mmccard, the image browser that comes with QD allows you to view any location on the mmccard. To facilitate your management, you can store it in the images file package or create your own file package, you can create subdirectories in the package to manage images by category!
Desktop settings: 1 menu → 2 tools → 3 settings → 4 game phone settings → 5 standby mode → 6 wallpapers → 7 Yes → 8 (select mmccard) → 9 (select your image storage location) → 10 confirm the image.
If you select an image, the image is full of colored bars, that is why the thumbnail is not updated. Go to image management to update the thumbnail image! [Install and uninstall the sisfile] The sisfile is like the installation program (setup.) of a software on the computer. After execution, you can install the program. The software in the SIS format includes: SIS games, players, browsers, etc ......
Install the SIS software:
First, make sure that the sisfile is in the root directory of the mobile phone or mmccard. 1. Go to the mobile phone menu → 2 tools → 3 program management → 4 (select the software you want to install) → 5 (install by pressing the left soft key) → 6 (Follow the prompts) → 7 exit Program Management
Note: After the installation is complete, the execution file (the icon) of the software you installed will be added to the menu. You can create a file package named game in the menu, move these icons to the package, so that more games can be installed and managed. In program management, a blackCubeThe block is the installed program, but the block is the program to be installed.
Uninstall the SIS software:
1. Go to the mobile phone menu → 2 tools → 3 program management → 4 (select the software you want to uninstall) → 5 (delete with the left soft key) → 6 (Follow the prompts to perform the operation) → 7 exit Program Management
Note: There is a small black block behind the file name to unmount the file, and there is no uninstalled sisfile. [Install and uninstall jar files] The icons of jar files downloaded from the Internet are the same as those of compressed files, that is, if you have installed WinZip compression software on your computer, the icon of the JAR file will be a zip icon (like a compressor). If WinRAR compression software is installed on your computer, then the icon of the JAR file will be RAR (like the pattern of several books stacked together ).
It should be noted that many new users cannot decompress the file after they download it to the computer. After decompression, they find that there is no sisfile (s60 execution file ), there is no system file package (copy version), but there are several file packages and some scattered files. That is to say, this compressed package may be a jar file. (In the Download Area, the webpage indicates whether the file is a jar file)
Installation Method: Do not decompress the package, copy it directly to any place on the mmccard and insert the card back to QD. Then open the resource management software (I don't know what software my friends are using, I use seleq1.65), find the compressed package on the card, select it, and press OK, run the "enable" command. The system automatically runs the treasure chest and installs it.
OK. The next step is the same as installing the sisfile. Once the installation is complete, the treasure chest is automatically disabled. A file with the same file name (different sizes) is added to the place where the jar package is stored ). Now both can be deleted.
OK. After the installation is complete, go to the treasure chest to play the game.
Unload method: This is simple. Enter the treasure chest, select the object to be detached, click the left soft key and execute the DELETE command (you can also press the C key to execute the unmount), and the system prompts whether to delete, confirm "yes" to uninstall. [Seleq]QD mandatory software This is a mobile phone system management software. I installed version 1.65. It can not only view any corner of the mobile phone memory, but also operate on it, many games and programs also rely on it for installation. Many veterans call this management software mandatory. I bought qd for three weeks and installed it, this type of mobile phone system management software must be installed, unless you are a friend who does not play mobile phones (so please sell qd, because you do not play mobile phones, there is no need to use qd ).
Operation introduction:
The direction key "Left" is used to move back to the parent directory.
The right arrow key is used to enter the subdirectory.
The arrow keys "up" and "down" are respectively the move up selection and move down selection.
The left soft key is the seleq function key, which is quite powerful. It can move files and modify file attributes (such as making a file a hidden file or a read-only file ...... And so on ).
Select the key (√) as a common menu.
The right soft key is disabled.
The C key is to delete the selected. Hide and read-only Use seleq to operate files or folders to make them hidden or read-only. Run seleq first, enter the directory, and selectCompositionFolder.
If a folder is selected, press the left software key and select "properties" in "File". There are three tags in this option, namely "General, details, and attributes ", right-click the arrow key and select attribute tag. You can see four options and change the function you want to use to the new one.
If the selected file is selected, press the OK key to view the "attribute" and perform the same operations. : Resource Manager seleq. v1.65 [Appman]QD mandatory software This software is a very powerful system and file management software.
Players can use it to close the thread. Get a larger running space.
Its powerful functions include:
1. View System Resources (Operating space/installer/Disk Space/running program and compressed memory)
Compressed memory: Option-compressed memory
Close all open programs: Options-tools-close all applications (some programs cannot use this method to close. The method described later is available .)
Restart mobile phone: Options-tools-Restart mobile phone
2. view the running program in the background
In this interface, you can move the cursor to the program you want to close. You can choose to close the program.
Move the cursor to the program you want to close and right-click the program to enter the program currently displayed.
Option-tool... you can view program information and thread information on the cursor.
Option-set options... You can select to display all programs opened after startup. Including the system.
3. view all running threads
Move the cursor to the thread. You can choose to close (option-tool-close selected program ). [The threads of some systems must be closed 2-3 times before they can be completely closed]. Some of the stubborn procedures mentioned above. You can also disable it here.
Here we will introduce the specific impact of some system threads.
1 menu can be closed, but it will appear again after you enter the menu.
2. The cntsrv cannot be closed. It will be slow if the call is closed.
3. sysamob can be disabled.
4 iserverarcese
5 emon can be disabled
6 unipertar can be disabled, but when we enter the image, unable to open images! You cannot enter the image.
7 SDP can be disabled
8. If Sch cannot be disabled, the app closed appman may appear.
9 MS can close but you need to first off ncnlist and sysamob, otherwise. Is not close!
10 btserver can be turned off, but Bluetooth btserver will be turned on again ....
11 cbsserver can be disabled
12 clknitzmdls can be switched off. [Supplement] This is an alarm. If the alarm is switched off, it will take 10 seconds to enter! At this time, there will be the clknitzmdls program in the appman.
13 calensvr can be disabled
14 satsvr can be disabled
15 if the btmanserver cannot be closed, a "hard" crashes and the battery needs to be removed.
16 ncnlist can be disabled, but if no incoming call is received, the first missed call will not appear.
17 faxmodem can be switched off after faxmodem is turned off... the mobile phone will not be able to use the data line as a cat.
18 securityobserver
19. If wapstksrv cannot be disabled, it will start from
20 loadersrv can be disabled
21 logserv can be switched off, but if one of them fails to receive a call, you will not be able to see the phone number. If one is closed with ncnlist, The Missed Call and phone number will not appear.
22 autolock can be disabled
23. The screensaver can be disabled. If it is disabled, no screensaver can be used.
24 watcher can close but cannot receive short messages, but can send Short Messages
25. If the phone cannot be closed, start is displayed.
26. If sysap cannot be disabled, start
27 if the SAE cannot be closed, start is displayed.
28 If the edbsrv cannot be disabled, a "hard" crashes and the battery needs to be removed.
29 If sysage cannot be disabled, a "hard" crashes and the battery needs to be removed.
30. The phoneserver can be disabled, but if it is switched off, a system error will occur in the Communication record,
31. mediaserverstub can be turned off. This is the sound. If you close the media drive, there will be no sound. The app closed mediaserverstub will appear whenever you watch SM or RealONE exit!
32 If ealwls cannot be disabled, it will start from
33. If c32 is disabled, app closed appman may appear.
34. eiksrvs cannot be closed. If you turn off the phone, it will be slow to exit and start
35 randsvr can be disabled
36 einfoserver can be disabled
37 dosserver can be turned off, but it will not be turned off and the phone lights will not be turned off, so do not turn off the good off and you have to split the battery again.
38 if the shareddataserver cannot be closed, the app closed appman may appear.
39. If starter cannot be disabled, the app closed main will appear! Then
40.
41 if ewsrv cannot be disabled, start
42 if the efile cannot be closed, the app closed appman will appear.
43 If the ekern cannot be closed, the app closed appman will appear.
4. view the installed program
You can choose to add programs to shortcuts: Option-add to shortcuts.
You can delete uncleared programs in the system.
Icon description:
Gear: The program in ROM, do not tamper
Folder: a common application, that is, the programs you have installed.
C: Compressed Program
Waste bin: some useless programs can be deleted if the phone memory is insufficient. : Process Management appman. v1.04.1 [QD volume problem] I don't remember the volume when QD was just purchased, or the volume after the lattice machine, but here I will tell you how to set the volume in three aspects.
First, the volume control of games and types of players: in fact, we may all know that the settings in this aspect are closely related to the software itself, such as 'rm player ', you can press the right arrow key to increase the volume when playing a video, or press the right arrow key to decrease the volume. For another example, in the game 'fairy adventure ', right-click the main menu of the game and choose the 'settings' option to set various settings including music and sound effects.
Second, set the volume of the incoming ringtone of the phone call (including audios, Midi, and WAV): Go to "menu> Tools> context mode> standard (I use this option, if you have different settings in this step, select the scene mode you are using, choose personalized settings, ringtone volume, and press the arrow key to control the volume on the left or right.
Third, set the volume of the phone receiver. When someone calls you, press the direction key to the right to increase the volume, while the left is to decrease the volume. When you call someone else, when there is a signal in the receiver, you can press the direction key to make the volume, the method is also the left and right direction key to complete the operation. [Text message backup] Many of my friends want to keep text messages when they are on a lattice machine. Or you may want to save the text messages on your computer so that you can view them again later. Now I have personally confirmed a method to completely store the entire information on the mmccard or on the computer!
Backup operation: first, make sure that "seleq 1.65" is installed on your mobile phone. I have not tried other versions. Go to seleq and copy c: \ System \ mail to the mmccard. Now, the backup process is simple. All the files in your mobile phone have been backed up, including MMS, SMS, inbox, and inbox ......
Restore operation: first, make sure that you have installed seleq 1.65 on your mobile phone, enter the information, and delete "inbox, my folder (including 'frequently-used phrase '), draft, sent information, sender, and sending status report, and then go to seleq and delete c: \ System \ mail, the system will prompt you to delete the system file. Don't worry about it. Press OK until the end, and the prompt "already used!" is displayed!" This is because a file in maail is in use and cannot be deleted. You don't have to worry about it. This step is half done.
Next, copy the backup mail on the mmccard to overwrite the original folder under C: \ system. If you don't have to worry about the prompt, simply press OK. If you have a lot of backup information, this step will take you several minutes, don't worry about it, put aside your phone, copy it, and then you will be prompted to "rewrite the overlapping file", Press OK. OK!
Don't worry. Now the information is displayed. You can't see any changes. Don't rush out of seleq. Use one of its functions: Option → tool → restart mobile phone → OK!
This is really OK. Let's take a look. All the files in your information are back! [PinYin Input Method] I found that the Pinyin input method that comes with QD has a trick to make the words you are looking for more accurate, generally in the first layout. As we all know, Some uncommon words are arranged at the end of the Pinyin input. It takes more than N pages to be found. During the operation, I found that the Pinyin Input Method of QD can be used to enter the tone! That is, one, two, three, and four. With this stuff, you can quickly find things that are not commonly used. The following is an example:
For example, if you look for the "Xi" (XI) of the Yu xi, It is ranked at 5th on page 1. Now you can use the tone input method to find it. Enter Xi, that is, press 9 and 4, after the two keys are entered, do not press anything. Now select Xi, press the * Key, click it for a single record, two for two, and three for three, four is four, and then press the fifth to return, and so on. The "Xi" is three. Therefore, press the "*" key, and there will be a four-byte sign next to the "Xi.
Look, the word "Xi" has mentioned 5th words on 1st pages! [Bluetooth receiving and saving] To implement this operation, you must install the system management software. Here, we use the seleq1.65 version as an example. If you have not installed this software, please install it soon :)
Step 1: Prepare for receiving: function key → tool → Bluetooth (on) → return to the desktop (this step is optional)
Step 2: receive the file: Ask your friend to send the file via Bluetooth :). When the recipient chooses to send the file, you will receive a system prompt asking if you want to receive the file sent via Bluetooth, needless to say, press "yes" and then OK! The recipient's mobile phone will display the transfer progress. When the sending is completed, your QD will prompt you to receive a short message. The sender is "Bluetooth ". Note! Do not press "show" to view the content in the text message, because some files (such as UMD files) will go wrong after being viewed in the text message and are automatically deleted by the system, your transfer will fail.
Step 3: Find the received file:
Method 1: seleq lookup method: First, you can see the name of the file to be searched. You only need to enter the information inbox, and you can see the full name of the file in the "Bluetooth" message of the sender. Then go to the seleq software, go to the C → system → mail package, and select the "0000100s s" package (the first package in mail ). Press the left soft key, select search, enter the file name, and enter the full name of the received file (including the suffix ). Press the OK key, and then press the left soft key. seleq searches for the "0000100s s" file package and finds the file to be queried. Next, press the left soft key → edit → copy → paste to the address you want to save.
Method 2: Enter the C → system → mail → 00001001_s package. If you have received many text messages, you will see 16 packages, the package will be less. Find these packages one by one. There will be no more file packages in these packages, all of which are scattered files. But there is also a file package in one of the packages. You don't need to check it. If you find this package, it contains the file you are looking for. copy it out, save to your specified address.
Step 4: Delete the text message: Exit seleq, enter the inbox in the information, and delete the text message sent by bluetooth.
OK, the drive c space is back, and the file is copied to your specified address.
Note: When you find the file, copy the file and do not splice it. Otherwise, the text message cannot be deleted. You must restart your mobile phone! What we often say is that the size of the received file cannot exceed the size of the drive C! Pay attention to another important issue! The received file is stored on the mobile phone drive C in the text message situation. Do not enter this information to view the content at any time! After you back up the data to the specified address, you can delete the data directly in the text message! [Business card search] The business card search function is the internal function of QD. After opening the business card folder, A 'magnifier 'is displayed on the screen, followed by 'abc', followed by an input box.
You can use the # key to select the input mode, namely ABC input, Pinyin input, stroke input, and 123 input. I used to think that my business cards are all named in Chinese. If I want to enter Chinese characters to search for business cards, isn't it better for me to directly look down for a quick refer? But when I understood how QD's business card search function worked, I woke up ......
You do not need to switch the input method, that is, use ABC input for search. The search results are surprising and accurate! The example is as follows:
Business Card Name:
Dad
Chen Jialuo
Chang Jianhua
Dong Xiaoxue
Du Qifeng
Feng xiaocao
Fu yanli
Gao yumeng
Hong Qigong
Huang Yu
Home
Jie
Vortex Naruto
Yu zhibo Zuo Zhu
Yuzhibo
Zhang Yuxi
Zhou huamin Search using ABC Input Method
For example, if you are looking for 'gao yumeng ', enter: gym
If you are looking for 'Dong Xiaoxue ', enter: dxx
For example, if you are looking for 'sister', enter: J.
Note: the order of business cards is arranged in alphabetical order, and the same is true for searching. When we enter a letter, such as Z, all the cards are placed on the screen, the name of the business card with the first character starting with the pinyin letter Z (you can see the name of the business card to be searched ), if you can't see it, enter the start Letter of the second character (you can see it if you have entered two letters, unless there are a lot of people with the same name in your business card ), otherwise, enter the start Letter of the third character (enter three letters to narrow the search scope to individual! Unless you have a person with the same name and surname on your credit card !) [Logo replacement] the so-called logo is the image displayed as "China Mobile" on the desktop (if the phone card is China Unicom, it will display "China Unicom"), which must be prepared (or downloaded) a bmp image with the size of "97x25". With this image, we can start to change it. The method is ultra-super-high, grade-level, and simple! First of all, make sure that the software seleq1.65 is installed on your mobile phone. (because I use this software, I have used the 1.7 version. It will be very troublesome to change the logo ), copy the BMP image of "97x25" to any location on the mmccard. Perform the following operations:
enable the software "seleq" → locate and select the image to be replaced → confirm the key → execute the "set operator logo" command (system prompt: after completion, □the system will be restarted) → Yes
OK. After the mobile phone is restarted, China Mobile will disappear and become ......
to change the settings back, use seleq (or any resource manager) to delete the files under c: \ System \ apps \ phone \ oplogo \, and then restart the mobile phone. |
