The modem sent to my ehouse is a castrated version that shields the route and can only have two accounts at the same time (the ehouse has two accounts). Now the computer in the house has been added, it is not enough for the two to access the Internet at the same time, so we need to crack them.
One post is well described. The privileged user telecomadmin is used to enter the modem for modification. However, when I use the primary account on my modem, I always report an authentication error (whether or not I add ^). Finally, I suddenly thought of using a subaccount. Follow these steps:
1 telecom superuser login telecomadmin/ne7ja % 5 m
2. log on to http: // 192.168.1.1/
3 2. Network --- Remote Management
4 TR-069 customer-configuration is critical, to completely turn off Remote Management
5. Notification -- disabled
6 China Telecom middleware-Disabled
7. The two ACS user names must be changed to invalid ones, such as hgw --- similar
8. This is a key step, so that custom settings will not be automatically changed back by China Telecom through remote management.
9. Wireless Settings
10. This is the same as the general AP settings, but it is only set a little less, mainly "channel" and some security settings.
11 4. DHCP
12 Generally, you can enable it. If disabled, You need to specify the IP address on the client.
13 5. Broadband settings
14 The most important thing is that the wireless Cat's broadband settings are unfriendly. Compared with Linksys, it requires too much professional knowledge.
15. Select "Internet connection". Many key parameters must be set on this page. Otherwise, automatic dialing and routing are not allowed.
16 (1) "connection name:" parameter. This parameter has n options and needs to be set one by one.
17 (2) "Mode:" parameter, select a "connection name:" (for example, "tr69_internet_r_0_32"), you must set this parameter to route, that is, the route
18. You must select "pppoe" for ADSL ".
19 (3) the VPI and VCI must be correctly set. For details about these two parameters, refer to telecom operators. (Changsha VPI/VCI 0/32)
20 (4) User name: (the User Name of the ADSL dial-up subaccount provided by the carrier)
21 (5) password: (the password of the ADSL dial-up subaccount provided by the carrier)
22 (6) dialing method: Select "Automatic Connection"
23 (7) Service Mode: Select "both"
24 (8) Port bound: All checked
25 (9) NAT: must be checked
26 (10) Keep others by default
27 6. Save settings and restart wireless cats
Some useful webshell pages are also found:
Backupsettings.html backup configuration page
Updatesettings.html upload configuration page
Scsrvcntr. CMD? Action = view the page for enabling Telnet and other ports (the admin/support/user password can be set after going through Telnet)
