Silver Fox inventory Butler printer offset calibration graphics and text tutorial

Print offset calibration only for express single printers, different brands and models of printers are likely to print offset, and most of the printer does not provide the hardware calibration function, so the Silver Fox provides a printing offset calibration function, to achieve a more accurate software migration.

　　Print Offset Calibration

1, from the main menu select "Order Management"-> "printer offset calibration" into the Offset Calibration Settings window, or in the Order Management window, click on the taskbar Offset calibration button, as shown in the following figure:

2, select the printer to be set, before entering the offset of the printer, we need to print a single express, use this to test how much deviation, and then fill in the deviation value of the offset in the window calibration column:

The offset is in millimeters and a negative number is filled if the print occurs with a negative offset.

　The first print is normal when you hit the phone, but the second one starts to appear offset

If the first print is normal when you hit the phone, but the second one begins to appear offset, refer to the following steps:

1, check the printer paper settings are correct: access to the computer control Panel-"equipment and printers-" Right-click the printer select "Printing Preferences", set the paper type and size

2, find an empty white paper, repeat printing the same address, such as repeated printing 4 times. If the 4-time word is overlapping, your printer's paper is normal. If 4 dozen words do not overlap, indicating that there is a problem with the printer paper, need to return to the factory to repair the printer, or replace the printer.