Simple SNMP setting command

Using SNMP to manage vswitches is a very effective method. So how to set the SNMP command? Let's talk about it briefly. Five tips for sending the SNMP setting commands of the switch. Learn the SNMP setting commands of the switch. There are many methods on the network. The following is a collection of methods for cracking. I hope it will be helpful to many enthusiasts, are common methods. Take the opportunity to provide it to you.

1) snmp-agent sys-info contact

Set the command administrator ID and contact method for the SNMP switch. Replace it with the value you want to set, the same below. The initial value is HuaWei BeiJing China. You can use the command display current-configuration to view this item at the end of the currently executed configuration.

2) snmp-agent sys-info location

Set the location information of the vswitch.

3) snmp-agent community read public

Set an SNMP Community. When using this Community to connect to a vswitch, you can only read the SNMP setting Command Information of the vswitch. You can replace the public in the command with the string you want.

4) snmp-agent community write private

Set an SNMP Community. When using this Community to connect to a vswitch, you can not only read the SNMP information, but also write the value to the snmp mib object to configure the device. You can replace private in the instruction with the desired string.

5) snmp-agent sys-info version all

Set the SNMP protocols supported by the vswitch, including v1, v2c, and v3. If you are not sure about the three versions, it is best to set it to all, and the three Protocols will be supported at the same time. Initially only v3 is supported on the S3050C-0025, and if you do not set it correctly, some reading software such as mibbrower may not be able to read the information.

Generally, you only need to set 3rd) and 5th) commands to read the SNMP setting Command Information of the switch. The settings on the old vrp system may be different. The vswitch I tested uses vrp3.10. I'm using a PHP-SNMP function to read the switch SNMP setting command information.