Six big Photoshop pictures tailoring tips

What do you do when you think the picture is out of your mind? Most of us will use the cutting to recreate the picture, and to make the photo more pleasing to the eye, but also to the interesting focus of the photos more clearly. We'll provide you with 6 tips for tailoring your photos below.

1 in accordance with the traditional ratio of tailoring

When you cut the photo, did you find that it looked strange when the cut was finished? Most of the time, it's because you're not tailoring it in proportion. The traditional 135mm whole-chip camera uses 3:2, and the universal SLR camera now uses a 3:2 ratio, because 3:2 is the size ratio of the film film, and is now the size ratio of the photosensitive element. Into the digital age, portable digital cameras, the size of the photosensitive element is 4:3; When the LCD screen emerged, the 16:9 percentage of photos grew, and many camera manufacturers built the ratio inside the camera, which is the advantage of not having black edges when viewing photos on an LCD screen and affecting impressions.

In addition to the rectangular proportions, there are 1:1 of squares of photographs. The most classic 1:1 photos are Polaroid photos, believed to be many readers of childhood memories. Many art photographers like to use the 1:1 composition method.

To sum up, the proportion of these photos is the traditional photo ratio, we do not recommend the reader to cut the photos casually, because the most comfortable and agreeable people will be the proportion, and then the strange proportion will not make the photo more special, but it will make the photos become weird.

2 It's important to save a new file.

Cutting digital photos is to remove unnecessary things, and digital tailoring photos have the opportunity to restart, most of the software is the restoration of the option to avoid the user accidentally modified wrong. But the opportunity is to fight for themselves, if you store the cropped photos, then no one can save you. The so-called original file is the most precious, save the most practical. , we recommend that the reader after cutting the photo to save a new file, the main can save the original file, even if not like the original tailoring, in the future can still use the original file again. Plus the cut, the pixel will have a loss, in case the discovery in some cases can not be used, then even want to go back to the opportunity to have no.

Most of the time we'll open a folder and put the processed photos

3 Pull Right level

If a housewife buys vegetables in a market, it will be like a green onion, we will pull the photo back on the right way when we cut the photo. Most of the time, we only pay attention to the theme when we shoot, ignoring the level of the photos. At a later stage of adjustment, some margins will be sacrificed. We recommend that the reader adjust the photo horizontally before cutting it so that there is no more loss of margin.

4 Learn to rearrange the composition

We have our own composition when we take pictures, and when we cut our own pictures, we can give you a chance to recreate the photos. As long as the proportion of cutting, you can highlight the original subject, and even transfer the subject. Now there are a lot of software cutting functions, such as Photoshop, have attached a well word composition, so that users can be in accordance with the method of well character composition, very convenient.

To recreate the picture with the method of well character composition

Degree of straightness, highlighting theme

5 Reserve Space before cutting

If the shot is found, the lens of the hand is not far enough, or only the fixed-focus mirror but not close, at this time we had to shoot and then cut. We should reserve enough space on the top and bottom of the subject to be used for tailoring and re composition. The more space is reserved, the higher the flexibility of tailoring, but attention to the problem of pixels, if the main body is too far, or reserved space more, cut out the less pixels, fewer pixels, the picture will be difficult to enlarge the printing, so that the scope of use will become less. So we have to strike a balance between flexibility and pixel at the time of filming, or take pictures with different focal lengths for easy tailoring.

The lens focus is not far enough to trim the rescue.

After cropping

6 skillfully use clipping to avoid the problem

Sometimes shot with an ultra wide-angle lens, or a large aperture shooting, there will be four corners of the loss of light, cleverly trimmed edge potential energy to effectively correct the loss of light, so that the photographer can enjoy the large aperture brought about by the depth of the light, while the average ray of photos. In addition, sometimes when there are additional people or things mirror, tailoring can take these away from the screen, so that the picture has a cleaner picture, the perception will be better.

With wide-angle focus, many times you will encounter problems with the four corners of the light.

After cutting: Through cutting, you can avoid the problem of stray light.

Category:

• PS Image Processing