Skillfully set Win7 power supply for computer cooling

　　in winter, if you are holding a laptop to the Internet, do not have to turn on the heating will feel very warm. But this is not a good thing, because the computer is more fragile than people, if the temperature is too high is likely to be directly hung out. So everyone in winter to keep warm for themselves, to cool the computer, in the summer to cool themselves, but also to the computer cooling. in the past to cool the computer first will think of replacing or transformation of cooling equipment, if you do not want such a fuss, in the Win7 system can also try to solve from the software.

Users using the WIN7 computer should be familiar with the power plans in the control Panel, the power Plan in Win7 has a lot of improvements compared to XP, providing three power modes, working in different modes, the working frequency of the computer hardware will change, thus affecting the electricity consumption, and indirectly achieving the goal of cooling. Win7 's three power plans are:

1. Energy-saving mode power consumption minimum thermal dissipation

In the energy saving mode, the power plan for the video card is "Maximum battery life", the processor is thermally passive, the minimum processor state is "0%", the maximum processor state is "100%", and the screen brightness is 40% when the battery is switched on, and the power supply is 100%. Energy-saving mode is more suitable for mobile office use, all hardware in the state of the lowest power consumption, is the minimum consumption of electricity mode, so the lowest heat dissipation.

　

2. Balance mode power consumption according to the use of the situation, the scattered heat slightly higher

The power plan for the video card is "balanced" under the default setting of the balance mode, the processor is thermally active after the power is switched on, the minimum processor status is "5%", the maximum processor state is "100%", and the screen brightness of the battery is 40%, and the power supply is 100%. In other words, in the balance mode only when the computer is active to provide full performance, when the time is not active, it will automatically enter the power-saving state. For most people, this is the most reasonable power plan.

3. High-performance mode power consumption, computer direct transformation Radiator

Under the default setting of High-performance mode, the power Plan of the video card is "highest performance", the processor is thermally active, the minimum processor state is "100%", the maximum processor state is "100%", the screen brightness is 100% when the battery is switched on, and the power supply is 100%. In high-performance mode all hardware is in the best working condition, so it will consume more power, and the thermal dissipation will naturally increase.

A few things you must know to cool your computer

For desktops, there are several ways to cool down in the heat of summer:

1, reduce CPU, GPU frequency;

2, increase the heat dissipation of the hardware, such as the replacement of better thermal conductivity of the radiator, the larger air volume fan;

3, improve ventilation conditions, such as cleaning the dust deposited on the heat sink, open the cover to make the temperature more easily distributed.

And for notebooks, in addition to increasing the radiator base such hardware methods, want to cool the computer by reducing the CPU, the use of the GPU to achieve.