Sky Wing Broadband Client Usage Guide

1. When you need to connect to the Sky Wing Broadband (WiFi) network, make sure that you are using a computer configured with the 802.11B/G standard functional module or device.

2. This version of the client only supports Windows XP, Windows Vista, and Windows 7 32-bit Chinese simplified operating systems.

3. Sky Wing Broadband (3G) for ev-do Reva Network, sky-wing Broadband (1X) for CDMA 1X network.

4. In order to ensure the normal use of wireless access services, please unplug the wired network cable when using the wireless access service such as Sky-wing broadband (WiFi), sky-wing Broadband (3G), sky-wing Broadband (1X).

5. China Telecom Sky-wing Broadband (WiFi) refers to the deployment of China Telecom Wireless communications network, China Telecom in the public hot spots laid in the "ChinaNet" as the name of the wireless broadband network.

First, installation instructions

Double-click the installer to enter the sky-wing broadband client ready to install the interface;

Figure 1 Preparing the Installation interface

Note: This process may last for a few minutes depending on your computer configuration, please be patient.

1.1 Enter Agreement terms interface

1 You must select "I have read the agreement, and accept all the terms of the above agreement" before entering the next installation

Figure 2 Agreement terms interface

2 Click the < Next > button to continue the installation process.

1.2 Select installation directory

1 Select the installation directory of the sky-wing broadband client.

Figure 3 Selecting the Install directory interface

2 Click the < Next > button to continue the installation process.

Figure 4 Installation Progress interface

1.3 Complete Installation

After installation, the following interface appears, you can select the "Yes, restart your computer Now" option, and click < finish > button to complete the installation of the sky-wing broadband client.

Figure 5 Installation Complete

Second, the main interface introduction

Figure 6 Client Main interface

Third, the Dial-up connection display status information as shown in the following table

Four, the Client interface switch information

Figure 7 The client interface after the network is connected

1 When you connect the network, want to make changes to the network connection, you can click on "More than network", the client interface to switch to select the network to connect;

2 When the client stays in the network connection interface, want to manage the extended application, you can click on the "More Application" button to switch the client interface to manage the extended application;