Small knowledge of printer use

  I, cartridge use common sense  

    ★  store cartridge at room temperature, avoid sunlight, strong light and heat source.
 
    ★  do not rip off the cartridge's outer packaging and blowhole seals until the cartridge is installed.  

    ★  when the cartridge is opened, please install it to the printer as soon as possible, otherwise it may cause ink cartridge leakage or no color.
 
    ★  for the best printing effect, use   within six months after the cartridge is installed.  

     ii. factors related to ink cartridge life  

    ★  in the use of color inkjet cartridges ( Here refers to the same body cartridge) in the process, we should pay attention to red, yellow, blue three tones of balanced use, do not only print a color-biased picture, because as long as the ink cartridge in a color, even if the other color is not exhausted, inkjet box can not continue to use.  

    ★  Generally speaking, the higher the resolution of the printed picture, the more ink is used.
 
     solutions to common problems during printing  

    ★  Frequently asked questions in the printing process the following: 

    ★  in the printing process encountered the above problems, first should be self-test, if the self-test pattern has a missing line phenomenon, you need to clean the print head. Under normal circumstances, by cleaning the print head and then carry out the self-test, the pattern does not line phenomenon.  

    ★  If the self-test pattern is still broken after cleaning, please repeat this operation 4~5, under normal circumstances, the self-test pattern of the lack of line will be reduced, this proves that cleaning is effective, should adhere to clean.  
    ★  Continuous cleaning does not achieve normalPrinting, indicating that the ink in the ink cartridge is less or no, the ink cartridge needs to be replaced.  

    ★  Newly installed ink cartridges sometimes encounter a self-test line or a certain color can not be blown out of the phenomenon, at this time, do not easily judge for the print head jams, most of the transport in the way of the upside down and storage and other reasons caused , the printhead should be cleaned.
 
    ★  Generally, if the self-test pattern has a small number of missing lines, such as not printing high-quality pictures (such as just printing files), you can print normally, without cleaning the print head.  

     Four factors that affect the effect of printing a picture  

    ★  cartridge quality.  

    ★  Media selection: Different brands of different texture of paper, printing effect is different (such as white paper out of the picture color is more vivid).  

    ★  The clarity of the original picture.  

    ★  The resolution selected when printing output.
 
    ★  prints pictures with different software, with different color saturation.