Smart phone can't connect computer problem solution

One, mobile phone data cable connected to the computer, mobile phone prompts "host no response" How to do?

Reason: This is because you are using a computer connected to the USB interface wiring or chassis front USB interface, try to test the rear of the chassis USB interface.

Second, the mobile phone connected to the computer, the choice of "data storage" phone will prompt "another program is in use."

Reason: This is because your phone uses the memory card's theme or ringtone, the solution is to put the theme, etc. in the cell phone storage. Do not use the mobile phone C disk theme.

Third, the use of mobile phone resource Manager (MMMB) can not read mobile phone a disk.

Reason: First of all, the smallest white error is that you do not have a PC kit installed, because MMMB requires a driver in the PC to connect to the phone, the second is because you don't have the option to connect to the data line in the MMMB, and then you don't have the registry installed; The last one might be a mobile phone C instead of a. If this is the case, you can reconnect the cell phone, use the USB interface behind the mainframe box, and then open the MMMB.

Four, the phone can not connect the PC suite problem.

Reason: Many Internet cafes can not connect to the PC suite, first of all because of the reason for driving the firewall, shut it down (because it is the mobile phone editor, and so on with the computer to teach you how to turn off the Internet Café Driver firewall); again because you used a computer mainframe chassis or USB connection, This requires you to try it with the USB port behind the chassis.

Five, about cannot install JAF or Phoenix and so on brush machine software.

Reason: First, maybe the computer is not supported, these software are operating conditions, and some computer platforms can not install them; Secondly, it is to put those anti-virus software, monitoring, firewalls and other all shut down or uninstall, such as 360 of the monitoring function in your download JAF automatically recognized as a Trojan horse program and automatically deleted!

Six, the handset connects the computer, does not have the prompting to install the driver, does not have the new hardware prompt in the computer hardware.

Reason: 1. First, you need to insert the memory card into your phone and format it. Steps: Setting--Initial setting--formatting an extra storage device (without inserting a memory card, this option does not appear)

2. When using the data cable to connect W388 with the computer, the hand opportunity prompts: "In memory mode to connect the mobile phone?" ", the choice is, the computer will be the phone as a storage device, mobile screen display" In memory mode, cell phone function is not normal use. "

3. Mobile memory will appear in the computer, copy files directly.

Note: The memory card needs to have enough usable capacity.