So that Windows XP under bootcamp can also have d hard drive slots)

Wow, haha... Finally, the hard drive slot D can be created for XP under bootcamp! Although it is not the same as bootcamp in the original phase, this method is really more simple than just another method, I will list my practices for candidates to take the exam.

First, describe the configuration of the hard disk magnetic area after I finish it:

• Mac OSX-100 GB (Mac OS daily Memory Format)
• Data-30 GB (fat-32 format)
• Windows XP-20 GB (the disk partition cut out by Bootcamp, formatted as NTFs)

 
The steps are as follows:

• Follow normalProgramInstall Mac OSX (do not cut into multiple partitions at this time). If there is a system, skip this step.
• I used bootcamp to cut the magnetic area to install XP. I cut 20 GB for a single user.
• According to the official program, install XP into the magnetic zone cut out by bootcamp
• After the XP Server is installed, use the Mac OSX server CD to start.
• Enter the disk tool program and separate one more disk. Set the disk format to "fat" and then re-start the disk.
• Enter Mac OSX, modify boot. ini in the hard drive of XP, and fill in part + 1 of partition.
   
  For example, my original boot. ini content is:

   

  [Boot loader] timeout = 30 default = multi (0) disk (0) RDISK (0) Partition (3) \ Windows [operating systems] multi (0) disk (0) RDISK (0) Partition (3) \ Windows = "Microsoft Windows XP Professional"/noexecute = optin/fastdetect

  To:

  [Boot loader] timeout = 30 default = multi (0) disk (0) RDISK (0) Partition (4) \ Windows [operating systems] multi (0) disk (0) RDISK (0) Partition (4) \ Windows = "Microsoft Windows XP Professional"/noexecute = optin/fastdetect

  If the disk format is NTFS, you can install macfuse and NTFS-3G for OS X on your own 」

• BelowNot necessarily required at the beginningThree-click selection (if you want to have an on-the-go option). If you don't need to, Jump directly to re-start and enter XP.
• Installing the "refit" host Management Program
• Restart the host and select "partition Tools" in the "refit" on the host 」
• And then press 「Y"Synchronize MBR data
• Re-boot into XP to see if the D-slot is displayed (the disk generation may be different. Please use the XP disk management tool to complete the correct disk generation)
• Close!

 
A system with Mac OSX + windows + interchange data and magnetic data zone was born.

Warning: the person who wants to renew the product should first prepare important materials. The side effects are unknown. It is triggered... XD