Software Engineering--the method of construction--functional test Design 10 or more test cases complete the functional testing of staple staples

Design 10 or more test cases to complete the functional testing of staple staples

(1) using different paper material thickness, using the same specifications staples, to see if the stapler is working properly

(2) using different specifications of staples, using the same thickness of paper material, to see if the stapler is working properly

(3) Test stapler is used in different ways to see if the stapler is abnormal

(4) test the total number of stapler use

(5) Test stapler after ordering materials, aesthetic times

(6) After testing the staple material, the number of unsightly

(7) test stapler under different temperature conditions, check whether the stapler is working properly

(8) Test stapler under different humidity conditions, check whether the stapler is working properly

(9) The use of different materials, test the stapler is normal screw-in

(10) Use the stapler with different pressure, test the stapler normal use minimum pressure

(11) Do not use staples to see if the stapler will be abnormal

(12) Do not nail anything, see if the stapler will be abnormal.

(13) Use too many staples to see if the stapler will be abnormal

(14) Use too few staples to see if the stapler will be abnormal

See table 1 (see below):

test Case (1 )
Thickness of the material	is working correctly (1-normal, 0-not working properly)
20mm
15mm
10mm
5mm
1mm
0mm
test Case (2 )
The length of staple staples	is working correctly (1-normal, 0-not working properly)
20mm
15mm
10mm
5mm
1mm
0mm
test Case (3 )
different ways to use	is working correctly (1-normal, 0-not working properly)
Press on the table
Pressure on the hand
Pressure on the wall
test Case (4 ) (5 ) (6 )
Total number of Uses	Number of aesthetics	Number of unsightly
test Case (7 )
Use at different temperatures	is working correctly (1-normal, 0-not working properly)
30 degrees
20 degrees
20 degrees
10 degrees
0 degrees
-10 degrees
-20 degrees
-30 degrees
test Case (8 )
Use under different humidity	is working correctly (1-normal, 0-not working properly)
100%
80%
40g
60g
20%
10%
0%
test Case (9 )
Use different materials	is working properly (1-can be nailed, 0-cannot be nailed in)
Paper quality
Bubble
Wood
Plastic
test Case (Ten )
Different pressure use	is working correctly (1-normal, 0-not working properly)
100N
80N
50m
40N
10m
20m
0N
test Cases ( one )
Do not use staple staples	is working correctly (1-normal, 0-not working properly)
Test Case ( )
Do not use staple staples	Working properly (1-normal, 0-abnormal)
Test Cases ( )
The number of staple staples	Working properly (1-normal, 0-abnormal)
1000
500
100
10
1

Software Engineering--the method of construction--functional test Design 10 or more test cases complete the functional testing of staple staples