Software faults caused by ADSL faults

(1) You can use the ENTERNET300 software to dial the internet, but cannot browse the Web page. Most of these problems occur when the system's TCP/IP protocol is damaged. Simply delete the TCP/IP protocol and reinstall it.
(2) The Internet access is unstable, and "dead" and "cut-off" often occur. This phenomenon may be caused by problems with lines, NICS, and computer hardware, or problems caused by unreasonable software installation in the operating system or poor software compatibility. In general, in the WIN98 system, install the win98SE patch before installing ADSL to access the Internet; do not install multiple types of dialing software in the same system when using the virtual dialing software; ENTERNET300 dialing software is recommended in WIN98, RASPPPOE dialing software is recommended in win2000, and PPPOE dialing software is recommended in WINXP; do not use registry optimization software or software such as ADSL super cavalry to modify or "optimize" The operating system. In fact, these software cannot increase the Internet access rate, but may lead to instability, in addition, many adsl modem manufacturers now provide many application functions, such as directly providing routing and built-in PPPOE dialing functions on the MODEM.
However, various functions have certain limitations. I suggest using them with caution. For example, using the built-in PPPOE dial-up Internet access method in Internet cafes can reduce a proxy server, but the transmission speed of ADSL is reduced due to the impact of broadcast storms.

Related Articles]

• Solve the problem of slow system startup caused by ADSL
  

• How to eliminate the strange problem of ADSL dialing
  

• Keep your ADSL device away from illegal attacks