0x0000007b blue screenCodeIt should be very familiar to anyone who understands computer maintenance work. Since the emergence of SATA hard disks, this code is often displayed on the screen! Yes, it is related to the SATA hard disk setting mode! Next I will explain in detail the truth!
To enable the new SATA hard drive to work in the optimal state, Dell modified the default Operating Mode of the SATA Hard Drive Controller in the BIOS. However, because the operating system disks of most new models are not integrated with the corresponding SATA controller drivers, this new technology cannot be supported. During Windows operating system installation, you may encounter a blue screen error with 0x0000007b.
At this time, you can adjust the BIOS settings to solve this problem.
1. In the blue Dell logo screen displayed after the device is powered on, press the "F12" key twice to enter BIOS settings
2. After Entering the BIOS settings screen, press "manage" on the keyboard to move the green highlight bar on the left of the screen to "SATA operation", and press Enter, the highlighted green bar jumps to the right of the screen.
3. Press raid autodetect/ATA next to raid autodetect/ATA and press enter on the keyboard to press Enter. In the dialog box that appears, press "→" on the keyboard and select "accept". Then, press "enter" and press enter to confirm.
4. Press the "ESC" key in the upper left corner of the keyboard. The highlighted green bar will come to the right of the screen again. Press the "→" key on the keyboard and select "Save/exit, press enter to save the settings and restart your computer.
5. then install the operating system according to the normal process.
If other models have similar errors, you can refer to this method to solve them!