Solution of incompatible problem between wireless network and wired network

Now that the 802.11n standard is ready to come out, many of the 802.11n draft standard products have appeared in large numbers. Many media manufacturers have advertised that 802.11n wireless networks will catch up with the wired network, advertising, and, at present, wireless networks are an effective complement to the wired network. Wireless networks are built on the basis of wired networks, and wireless applications are used more for the last few meters of space.

Wireless network for ordinary families and businesses have been very common things, the erection of wireless networks is also relatively simple, wired access to the wireless router, and then installed on the client computer wireless network card, but also installed wireless network card driver, wireless Internet access is easy to achieve. Of course, there are many other things to consider, including wireless security, wireless speed and wireless transmission distance. These questions are all about the hot issues of wireless networks. I want to talk today is not these problems, for the installation of wireless routers in the local area network, a very easy to ignore the problem: wireless network with the existence of the compatibility of wired networks, many netizens response is that this problem led to the end of the network.

We all know that General wireless router allocation to Wireless LAN IP is 192.168.1.X, if you are in the LAN access to wireless routers, the LAN allocation of IP is 192.168.1.X, in this case, the Wireless LAN network assigned by IP and wired LAN IP conflict, resulting in your wireless network can not connect out.

The performance of this situation is the computer can be assigned to the IP address, 2 computers can also be wireless connectivity, can transfer files, but not landing the Internet. To solve this problem, the method is very simple, as long as the router is set up, the router's assigned IP address and LAN IP can not conflict, landing to no line by the setting interface, the following figure:

In the LAN option, DHCP settings, set the subnet IP, the following figure, the IP address set to 192.168.10.x.

Although this problem is a small problem, but the LAN IP allocation is not good, it is likely to cause wireless network can not access the Internet directly cause.