Solution to BOOTERROR error reported by UbuntuUSB boot disk

1. Preface we need to install a Linux server on this side, that is, using a common PC. But for some reason, we cannot upgrade and install it on the system. Therefore, I have created a USBUbuntu boot disk; however, if you encounter a problem, BOOTERROR is prompted during startup. The following is a detailed introduction 2. The official Ubuntu documentation is still very detailed. The above describes how to produce USBSTICK. In WIN, in a Linux environment, I started a Startup Program in Windows according to the document.

1. Preface

We need to install a Linux server on this side, that is, using a normal PC, but for some reason, we cannot upgrade and install it in the system, so I made a USB Ubuntu boot disk;

However, if you encounter a problem, a boot error is prompted during startup. The following is a detailed description.

2. Description

It should be said that the official Ubuntu documentation is still very detailed, and the above clearly introduces the method for producing usb stick, which is introduced in WIN and Linux environments;

According to the document, I made a boot disk under WIN and used the tools and software officially provided. However, after the BIOS is set on the machine, adjust the boot device to USB-ZIP (there is also a USB-ZIP + format), General made out of the USB can choose this option, BOOT, read the U disk, ERROR: boot error;

I searched the internet and found no useful tips. Is it incomplete? Because the machine was infected with a virus and autoinf was blocked. inf write, re-production under Ubuntu, Ubuntu system installed with a production tool software, called usb-creator-gtk or kde, search for the software center and follow the official instructions. Unfortunately, an error is reported.

So I found a bug. It seems that there is a problem in some BIOS that cannot be booted. It may be the BIOS problem of this machine. One solution is to format it to FAT16, however, I am a 4g usb flash drive and cannot make it. It is very troublesome. I need to modify the boot file and give up on this idea;

This article provides a train of thought, made with UltralISO, really good very strong, you can refer to, I used it to make the USB-ZIP and USB-ZIP + format of the USB flash drive, all failed to start, is it a PE boot disk? Is there no way to solve the problem?

This BIOS version:

3. I made a new one and used the ZIP mode. However, I changed a machine and inserted the USB to boot the system. The USB is found in the BIOS and can be set to the first boot, it seems that there is no problem with the boot disk. I suddenly thought that the BIOS prompts that the USB-Floopy was found. Should I use this format? Go back to settings:

Below:

3.1. The USB Mode settings in the BIOS version are complex:

3.2 note that there is a usb flash disk type, the original no matter the USB into a USB-ZIP or HDD or ZIP + are useless, and then inspired by another machine above, open the AUTO option, such:

3.3, and then change the USB boot sequence as follows:

3.4. The final setting is as follows:

After setting, you can guide ~

4. Follow-up

Install the system

Because it is USB disk boot, so can not be directly installed, because the system disk can not be found, so first of all to find the system disk, the following provides steps and commands, you can refer to this article: http://www.linuxidc.com/Linux/2012-07/65294.htm