Solution to cell phone capacitive screen persistence and Failure

Bring your mobile phone to the bathroom and play songs while taking a bath
Fog broke the external Screen
Static electricity is generated on the external screen, causing the touch to fail.
------------------------------------
Of course, if you think I have a problem, it's because I have no spare money to buy an external screen.
You can buy more than two hundred yuan if you have money.
------------------------------------
As for the principle, I will not talk about it. I am interested in Baidu.
------------------------------------
(Website collection and experience) method:
Solution 1:
1. Turn off the phone, remove the battery, and hold the phone for about five minutes.
2. Find a USB data cable and connect to your mobile phone
3. Wash your hands or wet your hands.
4. in Wet hands, the thumb of the same hand is in contact with the metal part of the other end of USB cable, and the index finger is pressed to the ground for about two seconds.
5. Split the back cover and we can see a small metal block next to the battery compartment. This is the generator of mobile phone vibration, commonly known as the vibrator. Because it is also directly connected to the mobile phone motherboard, we can do the same thing. In wet hands, the same hand's thumb is in contact with the earthquake, and the index finger is pressed to the ground for about two seconds.
Solution 3:
The computer newspaper has an article on it to solve screen drift. Blow the screen with a hot air (blow the hair), pay attention to drive to the middle gear, blow to even feel the screen is hot on the line (Note: to remove the machine battery, I blow the machine to the hot)
Solution 4:
Electric Shock Method, electric shock screen with the power of the lighter (with a paper towel covered with water under the failure of electric shock), change the electric field, not all are applicable, everyone should be careful!
Solution 5:
Use transparent adhesive to keep pasting, tearing, and pasting until the screen is touch restored.
Solution 6:
When you are desperate to buy an external screen, you can try to make all the above solutions one by one and keep repeating them, it may take a long time to repeat the doping method, but 90% will be repaired successfully.

------------------------------------
Just release the maintenance method:
1. Extremely fear of static electricity: it is easy to penetrate the capacitive screen. Although the glass on the mobile phone surface of the capacitive screen has undergone some antistatic processing, it does not mean that it can withstand the static electricity of people * bodies in winter, in addition, many people like to paste a poor screen sticker that is prone to static electricity on it ...... Be careful when your pockets are streaking. It seems that there is a need for Bag configuration.
2. conductive media such as oil stains and sweat: a conductive layer will be formed when covered on the screen, causing the screen to move hands to clean, dry and then use. Take a pen and clean the screen frequently. Do not bring a shower room when taking a bath in winter.
3. Fear of "high" temperature: the "high" temperature here is not to be roasted with fire, but to a temperature of about 40 degrees, it may cause the capacitive screen to drift, which is at this temperature for a long time, the capacitive screen will be tilted to the braid and should not be used in the high temperature sun for a long time [recommended, if the screen temperature is high during charging, please use less machine to charge]
4. Fear of magnetic field: especially the electromagnetic field. If the small magnet is placed on the capacitive screen for a while, the capacitive screen will temporarily fail (and may cause permanent damage) do not move your cell phone close to a speaker or magnetic screw or other items.
5. Unstable voltage: Generally, when the finger is in contact with the capacitive screen, it will "suck" a little bit of current, and then the screen evenly transmits electricity from four corners to the position where the thumb is located, in this case, the capacitive screen may be moved or even invalidated when the transmission voltage is unstable ...... If the power usage is less than 20%, it is best to charge immediately.