Solution to ip1000 waste ink absorber full

How to handle the problem that the native ink absorber is full

The printer has finally been repaired.

During the two days of printing, I always said that the waste ink device should be full, and I always had to press the paper key to print it. Yesterday, the printer showed that the window suddenly turned red and Canon discarded ink Absorber Full, contact the distribution center for replacement. Then press the paper to print it.

I thought it was printing ink cartridges. When the collection was full, I went to the computer city to buy two new ones.

Back up, as shown in the old ink cartridge.

Yu Wei Ink Cartridge I split the ink frame and thought it was full of ink frame collection. I don't know how to clean it. I called the Computer City and said I would use water to fill the room, after talking about it for a long time, we didn't mean anything. ~ Later, the computer city people said, What is 1000?ProgramUsed online. We have booked an afternoon and asked them to fix it.

When I have no access to the Internet, check the problem on Baidu. This is really a problem (the solution I found online ):

Canon IP series waste ink clearing tool

The program is applicable to Canon IP series models:
Step 1: power off the printer. And unplug the power cord from the power supply.

Step 2: press the power key of the printer and insert the power cord. (The power of the machine is on)

Step 3: do not release the power key. Press 4 down to enter the paper key. Power light display: yellow-green-yellow-green.

Step 4: Release the power key. After the machine is started, the power light is off.

Step 5: restart the instance. The machine starts up normally. Connect to the computer and install the printed driver.

Step 6: Open the repair software. Click generaltool. The program window appears. Select this option from the USB port entry.
The USB port corresponding to the printer. Check cleaning and EPROM items and click Test 1. Printer
Power Light flashing. The machine has been cleared and can be restarted.

This is to clear the software address: Http://files.cnblogs.com/yinhu/canon%20ip1000zero.rar

 

First download the program from this website, and then follow the steps above to solve the problem, and now the printing does not need to press the paper key again. :)

 

Note: This method is applicable Canon Ip1000 printer.

 

You can press the power key to connect to the power source. When the power light is green, press the reset key twice at the same time. This is OK, but it is best to go to the next reset software, or you have to do the above operations every time you open the printer.

==================

 

Solution to ip1000 waste ink absorber full

Maintenance procedure with ip1000:

 

Today, my Canon ip1000 prompts me: "The Waste ink absorber is full. Contact the service center to replace the waste ink absorber ."
This is the disgusting trick of monopoly. I checked a post from a netizen and said that it would take 50, which is very dark !!
I learned about computers. I knew it was okay with my printer. It was canon who had a backdoor for the printer.
After referring to the solutions provided by netizens, I will write my experiences after repeated tests for your reference!
1. Prompt: "The Waste ink absorber is full. Please contact the service center to change the waste ink absorber. "After the printer is turned on, it will flash 7 times, no display
2. download the zeroth software. The software is available in this forum. You can search for it and upload it. (remember not to use it immediately, so you have to wait for N for a long time and no result, I just wasted an afternoon)
Method:
1. manually clear emergency records (This type of resetting is temporary, and the printer will not work once it is shut down.)
-- The Panel has only two keys (power supply on the left and paper feed on the right). Start, unplug the power cord, and press the left button to remove the power cord, after the plug-in, right-click the button at the same time (each click changes the color of the printer indicator), and then put it at the same time. (You must take this step. Otherwise, you cannot take two steps. Click testpattern1 and testpattern2 to display wait a moment ). Then the printer will run, and now it can be printed (temporary ,).
This is emergency cleared, the printer power plug is unplugged, and the next time will prompt that the waste ink is full.
2. Now the printer is ready for use. Run the cleanup software.
A. Select the port (USB port)
B. Check the eeprom clear
C. Click testpattern1. (The printer will run and get stuck. Press the power button.) A black/white page will be printed with parameters on it.

(Ip1000 P = v1.00 d = 00100.0 page = 1011 PL = 1011, Pr = 0000, CA = 0000, BL = 0000 settingtime = 2005/06/01 xx USB = (50av26 )) (It seems that 1011 pages are printed), and a colored bar page is printed after pattern2. The preceding parameter is also provided, and the parameter is the same as above. (In this way, both testpattern1 and testpattern2 are pressed once. If you press it again, it will show Wait a moment, so if you want to clear it again, you need to unplug the power source and run again to temporarily clear the first step)

Note the value of settingtime In the parameter. The Value After resetting is 1970/01/01. After resetting, the parameter is as follows:

(Ip1000 P = v1.00 d = 00000.0 page = 0000 PL = 0000, Pr = 0000, CA = 0000, BL = 0000 settingtime = 1970/01/01 00:00 xx USB = (50av26 ))

I unplugged the power twice and cleared it twice.
In this way, it is successfully cleared, and the time is almost one second. OK !!! It is n times faster than directly using software, not to mention that I did not directly clear the success, other experts do not know how to do the success, but according to them, it is normal to brush a minute or two.
I hope the solution can provide a reference for netizens who have the same problem.

Is there a problem?

Http://files.cnblogs.com/yinhu/canon%20ip1000zero.rar