Solution to "failed to call dllregisterserver, error code: 0 × 8007005"

2010-05-03 22:22:02| Category:

Other knowledge| Tag:DLL registration failed
|Font Size Subscription

When manually registering a DLL file, sometimes the following error occurs:CodeThe error code is 0x8007005, causing registration failure. This problem often occurs in Vista and Windows 7 systems. The solution is as follows:

Method 1:

Run (or [win] + r ):

Enter regsvr32 wavdest. dll and press enter to register,
If "the module wavdest. dll has been loaded, but the call to dllregisterserv fails, the error code is 0x8007005" is displayed, and press OK.
Then press start -- allProgram-- Attachment --- Run Command Prompt as Administrator (right-click) and enter regsvr32 wavdest. dll again
OK
I have tried this. It is very useful.

 

Method 2:

Press F8 at startup to enter safe Mode
After entering security mode, use the keyboard combination key win + R to open the system "run" dialog box. (You can enter CMD in the first two steps and press Ctrl + Shift + enter to enter administrator mode.) then, enter the field regsvr32 wavdest in the box. DLL and press enter to register the control. Shut down the computer and start the recording program properly.

Note: This document uses the wavdest. dll file as an example.