Solution to unstable disconnection of wireless routes connected to Macbook pro

Solution to unstable disconnection of wireless routes connected to Macbook pro

Generally, the connection to the Wi-Fi network is unstable or the connection is dropped:

1. Use non-Apple wireless routes; 2. Far from wireless routes

Possible reasons are:

1. The "channel" between you and your neighbor's wireless route conflicts with each other (if it is a tower or your neighbor uses a lot of wireless networks, the interference will be very serious );

2. The "band bandwidth" is too low and the wall-crossing capability is not strong (if you use a large floor or house area, this situation will cause serious interference signals );

3. The "wireless signal" mode is too old (this disconnection mainly occurs when the "wireless routing" Mode "option is" automatic, when your home has a second wireless device trying to connect to the wireless network, if the wireless module of the second access device is outdated, the wireless router will automatically adapt to the old launch mode );

4. The maximum transmit rate of wireless signals is too low.

Solution (important ):

1. connection to your home network (wired or wireless) (that is, you can access the Internet) (important)

2. In the MAC (WIN) system, open any browser and go to the address bar (where you enter baidu.com or youku.com) enter 192.168.1.1 (here the TP-LINK router for example, different brands of different countries of the wireless router settings may be different, see the instructions for wireless Routing), in the pop-up dialog box, enter "admin" in "username" and "password" (both in lower case)

3. Go to the vro settings page. Under "Wireless Settings" on the left, select the "Basic settings" subitem To Go To The Basic settings option.

4. Change "channel" to "9" (the default channel for wireless routing is generally,) to "9", which generally does not conflict with other routes and is not prone to disconnection. (Important)

5. "Mode" changed to "11n only"

6. Change "band bandwidth" to "40 MHz"

7. Change "Maximum transmit power" to "maximum" (I am here at 300 Mbps, and the general router is about 150 Mbps)

8. Click "save" (important). The wireless route automatically restarts.

This setting can basically solve the problem of connection to the wireless route disconnection through the MPO.

Update:

For more information about how to view public network data (such as "channels") between you and your neighbors to achieve optimal wireless router configuration, you can download a free foreign software named "istumbler, this software provides "channel" "wireless signal strength" "MAC address" and a series of useful data. (In the figure, a column of Data circled by the "red" box is the channel data)