Solve the problem of fiber-optic Internet router setting

    Step One: Set the computer's IP address and gateway

ADSL settings are implemented through browser access to its Settings page. In the default case, ADSL IP address of 192.168.1.1, as long as we will connect ADSL computer IP address set to the same network with ADSL, you can access ADSL Settings page, the specific is the computer IP address set to 192.168.1.x,x generally greater than or equal to 2 less than 255, the gateway set to 192.168.1.1, and then open the browser, in the address bar input ADSL IP address, that is, 192.168.1.1, you can access ADSL settings page. IP address is set up here to access ADSL, the gateway is to access the Internet later.

Step Two: Enter the default username and password

Enter the ADSL of the set network surface is required to use the user name and authentication password. The general default username is admin, and the default password is lowercase admin. If not, please take a look at your manual! Note that this username and password are not the username and password of the telecommunications company, but the user name and password of the ADSL device. After the correct input, you can enter the ADSL settings page.

Step Three: Enter the ATM page to set up the route

Click on the ATM link to enter the Settings page. Find the Connection type option, select the PPP option, and the PPP settings will be expanded at the bottom of the page. Set the username and password in the PPP settings, the username and password are your account number and password in the telecom (or other ISP), set here is for ADSL in the power-on when the automatic dialing.

Step Fourth: Set the auto assign IP address feature, DHCP features

Each computer on the network has a separate IP address, and in the same network, each computer's IP address is unique. Usually when we surf the Internet, the computer is set up to automatically obtain the IP address, that is, when the computer is connected to the network, the server will automatically assign a unique IP address to the computer, as you enter the theater when the ticket marked on the floor, automatic arranging, the same. However, in some local area networks, in order to facilitate software communication, the use of fixed IP address, that is, each computer has a fixed IP address, the same network will not appear exactly the same IP address, like the building in each room has a fixed number. If your network is using the previous IP address allocation method, you need to open ADSL automatic IP Address service function, that is, set up DHCP. On the DHCP page, you can select the DHCP server single option.

Step Fifth: Set up DNS

Select the DNS page to set up the DNS provided by the telecommunications company (or other ISP) in ADSL, which in general can be set to become 202.101.224.68. 211.147.6.3 ... It is best to fill in the local DNS server address

Step sixth: Save Settings

The above settings need to be saved in order to take effect, select the "Save" page to save the contents of the settings. Then close the browser and turn off the ADSL power. The next time the power is turned on, the original setting takes effect.

Step Seventh: Modify your computer's settings

If you choose the DCHP feature, you will need to modify the IP address that you just modified to set up ADSL. The IP address of the computer is selected to obtain the IP address automatically, the ADSL IP address namely 192.168.1.1 add to Gateway.

Step Eighth: Reboot the computer and turn on the ADSL power, and you will be free to surf the internet.

Security Tip: After you turn on the ADSL routing feature, your account number and password are stored in ADSL, which is easily stolen by others. Therefore, it is best to save the settings in the fifth step before modifying ADSL default password, will be MT800 the default password "admin" to other passwords, so that others easily into your ADSL settings interface.

Upgrading software: In ADSL provided by telecommunications companies, some versions do not have the above settings interface, such as the version number is V100P007C01B010SP01. At this point you can refresh your ADSL with other versions of the software just as you would upgrade your computer BIOS, which is actually refreshed with a lower version of the software, usually a version number for V100R006C01B010SP02. Refreshing process is relatively simple, as long as the corresponding software, in the ADSL "software Upgrade" interface in accordance with the instructions to operate on the line. If your ADSL model is exactly Huawei MT800, you can download the software directly and upgrade it.

Other actions: You can also take the corresponding parameters in the address bar, and then enter the appropriate settings interface, that is, enter: 192.168.1.1/mainpage?id=x,x values see the following table:

ADSL Set page X value effect

Smartax MT800 6 MT800ADSL Set home page

ATM Setup 25 page to set routing features

Other settings

ADSL mode/

LAN configuration 2

&NB SP;