Solve the problem of high CPU usage in Linux Kipmi0 process

Google can not find much information, see a saying: is some platform Interface manager. Do not dare to kill, and then check the data.

Look at the professional saying:
KIPMI is supposed to run with the low priority. When you say it consumes 70-90% of the CPUs, was that constant (does it still consume the processor when they are other TAS KS in the process queue this should have a larger slice of the CPU time) or the 70%/90% comes when the machine is idle?
A second issue to investigate are whether you have pending controller issues (alarms of varying-nature-are not resolve d) and/or older versions of Controller firmware.

View service Chkconfig found that only approximate IPMIEVD services, it is estimated that this, with the information on the internet said the IPMI discrepancy!

FIX: No repair required

The code is as follows
No fix required. You are should ignore increased CPU utilization as it has no impact on actual system performance.

Although this is a use of spare CPU resources to do some interface automatic adjustment task, but look at the amount of resources still afraid of accidents.

Find: Can temporarily reduce

The code is as follows
echo >/sys/module/ipmi_si/parameters/kipmid_max_busy_us www.111cn.net In our System,after set this parameter,the CPU of the kipmi0 decreased to 15%.

When you do execute the above command, the CPU's single core resources are reduced from 100% to 10%.

Can try this. Permanent reduction

The code is as follows
To make the changes persistent your can configure the options for the Ipmi_si kernel module. Create a file in/etc/modprobe.d/, i.e./etc/modprobe.d/ipmi.conf, and add the following content: # prevent Kipmi0 from consuming 100% CPU Options Ipmi_si kipmid_max_busy_us=100

It's written in, but it's not reboot test yet.