After the GHOST Win7 system is installed using the PE tool, an error is reported on the "Press esc for recovery menu" black screen when you restart the system. If you Press the ESC key, the figure 2 interface is displayed.
Figure 1
Figure 2
The "Press esc for recovery menu" black screen reports an error. Generally, the GHOST WIN7 system is installed. After the GHOST version is installed, the main boot record of WIN7 is changed to GRUB4DOS, however, the MENU cannot be found (or it does not exist at all. this error occurs when the LST file is created.
Procedure:
Tip: back up important data in advance to avoid unnecessary losses. This article is only for your study and exchange. If you have any questions, please consult relevant professionals.
To solve this problem, the simplest and most effective method is to reconstruct MBR boot.
The following uses the U depth as an example to use the partition tool Diskgenius to reconstruct the master boot record.
1. Make the USB flash drive into a U-depth boot disk and connect it to the computer. Restart the computer and wait for the display to display the boot screen. Press the USB flash drive boot shortcut key to enter the boot item selection window, then select the U disk to go to the U depth main menu, select "[02] run U depth Win8PE installation maintenance edition (New Machine)", and press the Enter key to confirm, as shown in the following figure:
2. After entering the Win8PE system, double-click the "partition tool Diskgenius" icon on the desktop, as shown in the following figure:
3. In the partitioning tool Diskgenius, choose hard disk> master boot record reconstruction (MBR), and select yes in the displayed dialog box ", as shown in the following figure:
4. Wait for the tool to rebuild the master boot record. After the repair is completed, the "task completed successfully" prompt window will pop up and press the "OK" button, as shown in the following figure:
After completing the preceding steps, restart your computer to go to the Windows system.