Start and Stop sota system service processes (Chapter: 4.2)

4.2 system service process 4.2.1 Start and Stop of oBus

Start: Enter "Please Input ==> start" on the main interface of sotaCC, and go to the "start service process" menu, as shown in Figure ‑ obus_start.

Stop: Enter "Please Input ==> stop" on the main interface of sotaCC to the stop service process menu,

However, the oBus should be stopped after the oPlanner is stopped.

Figure 2_oBus_start.

Startup Process	Operation Interface
For example, right input 1	* *************** SOTA Start Server MENU ***************** 1 -- Start oBus 2 -- Start oPlanner Q -- QUIT * *************** SOTA Start Server MENU ***************** Please input Your StartServer Cmd => 1

Figure ‑ obus_start

Startup Process	Operation Interface
For example, right input 2	* **************** SOTA Stop Server MENU ***************** 1 -- Stop oPlanner 2 -- Stop oBus Q -- QUIT * **************** SOTA Stop Server MENU *****************   Please input Your StopServer Cmd => 2

Figure 2_oBus_Stop

 

4.2.2 oPlanner Start and Stop

After the oPlanner. cfg/License. dat/JobList. xml file is configured, you can operate the oPlanner program. The oPlanner system service process can be started only after the oBus process is run. If the oBus process does not exist, the oPlanner cannot get up. When stopping, you need to stop oPlanner first.

After oBus is started, enter "Q" and return to the main interface and enter "Please Input ===> start". See figure ‑ obus_start to start oPlanner and Input "2" to start oPlanner;

To stop the oPlanner, enter "Q" and return to the main interface and enter "Please Input ==> start". See figure 2_oBus_start and enter "1" to stop the oPlanner.