Start Linux on zyqn7000

Today try to run the implementation xillinux on the Zybo,Super Simple, a fool-type installation. Belowin ChineseIntroduction, detailed information to seeXillybus.com/xillinuxAndXillybus.com/docGetting started with Xillinux for Zynq-7000 EPP PDF document. S1: Download related image Project Xillybus.com/downloads/xillinux-eval-zybo-1.3.zip xillybus.com/downloads/xillinux-1.3.img.gz Download the above two files S2: Download one of the following two programs USB Image Tool download.cnet.com/usb-image-tool/3000-2242_4-75449768.html Win32 Disk Imager www.softpedia.com/get/CD-DVD-Tools/Data-CD-DVD-Burning/Win32-Disk-Imager.shtml S3: Mount image file to sd card Unzip the xillinux-1.3.img.gz to get the xillinux-1.3.img file and load it into the Micro SD card using one of the software above (instead of using the Windows Format tool directly, use the previous two tools to do this step) (use of micro SD card above 2G) When you are finished, you can see that the SD card capacity becomes 20MB S4: Generating a bit fileDownload the following accessories do not do this step Unzip the Xillinux-eval-zybo-1.3.zip Open/SYSTEM/SYSTEM.XMP, click Generate Netlist on the left in XPS, and close XPS when done Open/runonce/runonce.xise, click FIFO 32x512 in the upper left of the Ise, and then double-click the regenerate core below the window below it to finish, Continue to do the same for FIFO 8x2048 and VGA FIFO Open/verilog/xillydemo.xise, double-click Generate programming file, and you can generate Xillydemo.bit files when you are finished. S5: Copying files to boot partition In the xillinux-eval-zybo-1.3.zip extracted from the Bootfiles folder copy Boot.bin and DEVICETREE.DTB to the sub-area of the Micro SD card, and then The xillydemo.bit files in the Verilog folder are also copied to the SD card, when there are 4 files in the SD card, respectively: Uimage Boot.bin Devicetree.dtb Xillydemo.bit At the end of the attachment there are 3 files in the back 3 S6: Start-up preparation work Insert the SD card into the card slot on the back of the Zybo board card and select the jumper interface underneath the VGA as "SD" Connect a USB HUB in the USB OTG interface on the lower left and link the mouse and keyboard using the switching power supply link power supply interface Link the VGA monitor to the Zybo Development Board and plug the network cable into the Ethernet interface S7: Boot Can see the boot process on the VGA, until stopped when the keyboard input startx enter, in a moment you can see the Xillinux desktop S8. Restore SD card Original space In order to speed up the image loading speed, in fact, only the format of about 2G SD card space, my 16G SD card and 13G more space are useless, in order to be able to use the following operations # fdisk/dev/mmcblk0 Then enter it separately: D [enter],2 [Enter],n[enter] [Enter],[enter],[enter],[enter],w[enter], If there is a problem in the middle detail reference getting started with Xillinux for Zynq-7000 EPP, Then restart Linux After boot # RESIZE2FS/DEV/MMCBLK0P2 and use # df-h View the last appended results

Start Linux on zyqn7000