Start pandorabox cubietruck

U-boot SPL 2014.04 (Oct 31 2014-17:02:41)

Board: cubietruck

DRAM: 2048 MIB

CPU: 960000000Hz, Axi/AHB/APB: 3/2/2

SPL: Not An uimage at 1600

U-boot 2014.04 (Oct 31 2014-17:02:41) allwinner Technology

CPU: allwinner A20 (sun7i)

Board: cubietruck

I2C: Ready

DRAM: 2 Gib

MMC: sunxi SD/MMC: 0

* ** Warning-bad CRC, using default environment

In: Serial

Out: Serial

Err: Serial

Net: dwmac.1c50000

Hit any key to stop autoboot: 0

Reading uenv.txt

240 bytes read in 16 MS (14.6 kib/s)

Loaded environment from uenv.txt

Running uenvcmd...

Reading uimage

2540384 bytes read in 293 MS (8.3 MIB/s)

Reading dtb

23026 bytes read in 29 MS (775.4 kib/s)

# Booting kernel from legacy image at 46000000...

Image name: arm openwrt Linux-3.14.18

Image Type: ARM Linux kernel image (uncompressed)

Data size: 2540320 bytes = 2.4 MIB

Load address: 40008000

Entry Point: 40008000

Verifying checksum... s success rate 2

Starting kernel...

[1, 0.000000] booting linux on physical CPU 0x0

[0.000000] Linux version 3.14.18 ([email protected]) (GCC version 4.8.3 (pandorabox/linaro GCC 4.8-2014.04 svn-r173) #5 SMP preempt Tue Nov 4 14:08:28 CST 2014

[0.000000] CPU: armv7 processor [127fc074] Revision 4 (armv7), Cr = 10c5387d

[0.000000] CPU

[2, 0.000000] Machine Model: cubietech cubietruck

[2, 0.000000] Memory Policy: data cache writealloc

[0.000000] percpu: Embedded 7 pages/CPU @ ee7d6000 s7104 r8192 d13376 u32768

[0.000000] built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768

[0.000000] kernel command line: Console = ttys0, 115200 earlyprintk rootwait root =/dev/mmcblk0p2

[0.000000] PID hash table entries: 4096 (Order: 2, 16384 bytes)

[0.000000] dentry cache hash table entries: 131072 (Order: 7, 524288 bytes)

[0.000000] inode-Cache hash table entries: 65536 (Order: 6, 262144 bytes)

[0.000000] memory: 2074212 K/2097152 K available (3603 K kernel code, 161 K rwdata, 1016 K rodata, 182 K init, 602 k bss, 22940 K reserved, 1318912 K highmem)

[2, 0.000000] virtual kernel memory layout:

[0.000000] vector: 0xffff0000-0xffff1000 (4 KB)

[0.000000] fixmap: 0xfff00000-0xfffe0000 (896 KB)

[1, 0.000000] vmalloc: 0xf0000000-0xff000000 (240 MB)

[0.000000] lowmem: 0xc0000000-0xef800000 (760 MB)

[0.000000] pkmap: 0xbfe00000-0xc0000000 (2 MB)

[0.000000] modules: 0xbf000000-0xbfe00000 (14 MB)

[0.000000]. Text: 0xc0008000-0xc048af04 (4620 KB)

[0.000000]. init: 0xc048b000-0xc04b8bc0 (183 KB)

[0.000000]. Data: 0xc04ba000-0xc04e2660 (162 KB)

[0.000000]. BSS: 0xc04e2660-0xc057921c (603 KB)

[0.000000] slub: hwalign = 64, order = 0-3, minobjects = 0, CPUs = 2, nodes = 1

[2, 0.000000] preemptible hierarchical RCU implementation.

[1, 0.000000] RCU restricting CPUs from nr_cpus = 4 to nr_cpu_ids = 2.

[0.000000] RCU: Adjusting geometry for rcu_fanout_leaf = 16, nr_cpu_ids = 2

[1, 0.000000] nr_irqs: 16 nr_irqs: 16 16

[0.000023] sched_clock: 32 bits at 24 MHz, resolution 41ns limit

[2, 0.137688] usbcore: registered new interface driver Hub

[2, 0.137821] USB core: registered new device driver USB

[1, 0.137933] pps_core: linuxpps API ver. 1 registered

[0.137941] pps_core: software Ver. 5.3.6-copyright 2005-2007 Rodolfo giometti <[email protected]>

[2, 0.137966] PTP clock support registered

[0.138837] switched to clocksource Timer

[0.140352] clockevents: cocould not switch to one-shot mode: dummy_timer is not functional.

[2, 0.140371] cocould not switch to high resolution mode on CPU 0

[2, 0.145793] Net: Registered protocol family 2

[0.146788] TCP established hash table entries: 8192 (Order: 3, 32768 bytes)

[0.146877] TCP bind hash table entries: 8192 (Order: 4, 65536 bytes)

[0.146998] TCP: Hash Tables configured (established 8192 bind 8192)

[2, 0.147074] TCP: Reno registered

[0.147095] UDP hash table entries: 512 (Order: 2, 16384 bytes)

[0.147150] UDP-lite hash table entries: 512 (Order: 2, 16384 bytes)

[2, 0.147466] Net: Registered protocol family 1

[0.148773] futex hash table entries: 512 (Order: 3, 32768 bytes)

[2, 0.148875] audit: initializing Netlink subsys (disabled)

[0.148941] audit: TYPE = 2000 audit (0.130: 1): initialized

[0.149514] bounce pool size: 64 pages

[2, 0.157330] VFS: disk quotas dquot_6.5.2

[0.157669] dquot-Cache hash table entries: 1024 (order 0, 4096 bytes)

[0.159574] squashfs: Version 4.0 (2009/01/31) Phillip lougher

[0.159587] jffs2: Version 2.2 (NAND) (Summary) (lzma) (rtime) (cmode_priority) (c) 2001-2006 Red Hat, Inc.

[1, 0.160522] msgmni has been set to 1475

[0.162407] Io scheduler Noop registered

[1, 0.162425] Io scheduler deadline registered

[1, 0.162470] Io scheduler CFQ registered (default)

[0.162744] platform 1c13400. PHY: Driver sun4i-usb-phy requests probe Deferral

[2, 0.164994] sunxi-pinctrl 1c20800. pinctrl: initialized sunxi Pio driver

[0.206567] serial: 8250/16550 driver, 8 ports, IRQ sharing disabled

[0.228851] 1c28000. Serial: ttys0 at mmio 0x1c28000 (IRQ = 33, base_baud = 1500000) is a u6_16550a

[0.809757] Console [ttys0] Enabled

[0.834185] 1c28800. Serial: ttys1 at mmio 0x1c28800 (IRQ = 35, base_baud = 1500000) is a u6_16550a

[0.844075] platform 1c18000. SATA: Driver ahci-sunxi requests probe Deferral

[1, 0.852799] stmmaceth 1c50000. Ethernet: no regulator found

[1, 0.858340] stmmaceth 1c50000. Ethernet: No Reset Control found

[2, 0.864216] ring Mode Enabled

[2, 0.867271] No hw dma feature register supported

[2, 0.871805] Normal Descriptors

[0.875128] TX checksum insertion supported

[0.883567] libphy: running Mac: probed

[0.886981] eth0: phy id 001cc915 at 0 IRQ 0 (stmmac-0: 00) Active

[0.893145] eth0: phy id 001cc915 at 1 IRQ 0 (stmmac-0: 01)

[0.898741] ehci_hcd: USB 2.0 'enabled' host controller (EHCI) Driver

[2, 0.905303] EHCI-platform: EHCI generic platform driver

[0.910744] platform 1c14000. USB: Driver EHCI-platform requests probe Deferral

[0.918044] platform 1c1c000. USB: Driver EHCI-platform requests probe Deferral

[2, 0.925491] USB core: registered new interface driver USB-storage

[2, 0.931839] mousedev: PS/2 mouse device common for all mice

[0.939064] sunxi-wdt 1c20c90. watchdog: watchdog enabled (timeout = 16 sec, nowayout = 0)

[0.947905] sunxi-MMC 1c0f000. MMC: Got CD gpio #225.

[0.953150] sunxi-MMC 1c0f000. MMC: Base: 0xf00f4000 IRQ: 64

[2, 0.959036] platform 1c12000. MMC: Driver sunxi-MMC requests probe Deferral

[1, 0.967189] sunxi-SS 1c15000. crypto-engine: Die ID 0

[2, 0.973724] TCP: Cubic registered

[2, 0.977045] initializing xfrm netlink socket

[0.981426] Net: Registered protocol family 17

[1, 0.985969] 8021q: 802.1Q VLAN support v1.8

[2, 0.990246] registering SWP/swpb emulation Handler

[1, 0.995492] registered taskstats version 1

[0.999632] regulator-dummy: disabling

[1.003968] ahci-5v: 5000 mv

[1.007374] usb1-vbus: 5000 mv

[1.010944] usb2-vbus: 5000 mv

[1.014402] vmmc3: 3300

[1.080366] ahci-sunxi 1c18000. SATA: controller can't do PMP, turning off cap_pmp

[1, 1.087853] ahci-sunxi 1c18000. SATA: forcing ports_impl to 0x1

[1, 1.093776] ahci-sunxi 1c18000. SATA: ahci 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl Platform Mode

[1.102757] ahci-sunxi 1c18000. SATA: Flags: ncq sntf PM led clo only Pio slum part ccc

[1, 1.113715] scsi0: ahci_platform

[1.117374] ATA1: SATA Max udma/133 mmio [mem 0x01c18000-0x01c18fff] Port 0x100 IRQ 88

[2, 1.125684] EHCI-platform 1c14000. USB: EHCI Host Controller

[1.131445] EHCI-platform 1c14000. USB: new USB bus registered, assigned bus number 1

[1.139291] EHCI-platform 1c14000. USB: IRQ 71, Io mem 0x01c14000

[1.160353] EHCI-platform 1c14000. USB: USB 2.0 started, EHCI 1.00

[1.166635] USB usb1: new USB device found, idvendor = 1d6b, idproduct = 0002

[2, 1.174469] USB usb1: new USB device strings: MFR = 3, Product = 2, serialnumber = 1

[2, 1.181720] USB usb1: Product: EHCI Host Controller

[2, 1.186621] USB usb1: Manufacturer: Linux 3.14.18 ehci_hcd

[2, 1.192130] USB usb1: serialnumber: 1c14000. USB

[1.197207] hub 1-. 0: USB hub found

[1.201044] hub 1-0. 0: 1 port Detected

[2, 1.205604] EHCI-platform 1c1c000. USB: EHCI Host Controller

[1.211236] EHCI-platform 1c1c000. USB: new USB bus registered, assigned bus number 2

[1.219071] EHCI-platform 1c1c000. USB: IRQ 72, Io mem 0x01c1c000

[1.240327] EHCI-platform 1c1c000. USB: USB 2.0 started, EHCI 1.00

[1.246597] USB usb2: new USB device found, idvendor = 1d6b, idproduct = 0002

[2, 1.253399] USB usb2: new USB device strings: MFR = 3, Product = 2, serialnumber = 1

[2, 1.260624] USB usb2: Product: EHCI Host Controller

[2, 1.265498] USB usb2: Manufacturer: Linux 3.14.18 ehci_hcd

[1.272014] USB usb2: serialnumber: 1c1c000. USB

[1.278058] hub 2-. 0: USB hub found

[1.281865] hub 2-0. 0: 1 port Detected

[1.286993] sunxi-MMC 1c12000. MMC: Base: 0xf0138000 IRQ: 67

[1.367527] mmc0: host does not support reading read-only switch. Assuming write-enable.

[1.480338] ATA1: SATA link down (sStatus 0 scontrol 300)

[1.500424] waiting for root device/dev/mmcblk0p2...

[1.520367] USB 1-1: new high-speed USB device Number 2 using EHCI-Platform

[1.570326] mmc0: New High Speed sdhc card at address 1234

[1.576432] mmcblk0: mmc0: 1234 sa08g 7.21 Gib

[2, 1.582465] mmcblk0: P1 P2

[1.615844] VFS: mounted root (squashfs filesystem) readonly on device 179: 2.

[1, 1.623313] freeing unused kernel memory: 180 K (c048b000-c04b8000)

[1.745876] USB 1-1: new USB device found, idvendor = 048d, idproduct = 1167

[2, 1.786200] USB 1-1: new USB device strings: MFR = 1, Product = 2, serialnumber = 3

[1.793409] USB 1-1: Product: USB Mass Storage Device

[2, 1.798458] USB 1-1: Manufacturer: ite tech

[1.802655] USB 1-1: serialnumber: 0000000922310679

[1.808352] USB-storage 1-. 0: USB mass storage device detected

[1.817778] scsi1: USB-storage 1-. 0

[1.893542] sunxi-MMC 1c12000. MMC: Smc 1 err, CMD 8, RTO !!

[1, 1.995352] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)

[1, 2.004764] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

Procd: console is alive [2.113986] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)

Procd:-watchdog-

[1, 2.128829] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)

Procd:-ubus-

Procd:-init-

Please press enter to activate this console.

Busybox v1.22.1 (17:16:37 Cst) built-in Shell (Ash)

Enter 'help' for a list of built-in commands.

_______________________________________________________________

|____ _ ____ |

| _ __| | ___ _ | _) _____ _ |

| _)/_ '|' _ \/_ '|/_ \ |' _/_ '| _ \/|

| _/(_ | (_) | (_ | _) | (_)> <|

| _ | \__, _ | \__, _ | \___/| _ | \__, _ | ____/\ ___/_/\ _ \ |

|

| Pabdorabox SDK plantform |

| Copyright 2013-2014 |

| [2, 7.368559] Net: Registered protocol family 10

[7.399681] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[7.422771] ip6_tables: (c) 2000-2006 netfilter core team

[7.450564] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea

[7.458490] backport generated by backports. Git backports-20140320-37-g5c33da0

[7.488367] ip_tables: (c) 2000-2006 netfilter core team

[2, 7.610091] xt_time: Kernel timezone is-0000

[7.650566] Listen 80211: Calling CRDA to update world regulatory domain

[7.670500] 255.80211: world regulatory domain updated:

[7.675651] limit 80211: DFS master region: unset

[7.680003] limit 80211: (start_freq-end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)

[7.714448] 11680211: (2402000 kHz-2472000 kHz @ 40000 kHz), (N/A, 2000 MBM), (N/)

[7.729518] 11680211: (2457000 kHz-2482000 kHz @ 40000 kHz), (N/A, 2000 MBM), (N/)

[7.744698] 11680211: (2474000 kHz-2494000 kHz @ 20000 kHz), (N/A, 2000 MBM), (N/)

[7.759926] 11680211: (5170000 kHz-5250000 kHz @ 160000 kHz), (N/A, 2000 MBM), (N/)

[7.775340] 11680211: (5250000 kHz-5330000 kHz @ 160000 kHz), (N/A, 2000 MBM), (0 s)

[7.797717] 11680211: (5490000 kHz-5730000 kHz @ 160000 kHz), (N/A, 2000 MBM), (0 s)

[7.820163] 11680211: (5735000 kHz-5835000 kHz @ 80000 kHz), (N/A, 2000 MBM), (N/)

[7.840577] 11680211: (57240000 kHz-63720000 kHz @ 2160000 kHz), (N/A, 0 MBM), (N/)

[2, 7.855160] PPP Generic Driver version 2.4.2

[2, 7.870573] Net: Registered protocol family 24

[2, 7.894962] usbcore: registered new interface driver rtl8192cu

Procd:-Init complete-

Start pandorabox cubietruck