Static IP configuration under Linux "Weber Productions"

Configure a static IP address under Linux

Because the IP address of the server is fixed, unlike the IP of our own home notebook is dynamic. So we're going to write this address as static.

Edit this configuration file directly:

Vi/etc/sysconfig/network-scripts/ifcfg-ethx

device=eth0 Bootproto=static  HWADDR= ; Here is the physical address of your network card, do not enter onboot=Yes ipaddr =192.168. 0.1 NETMASK=255.255. 255.0 NETWORK=192.168. 1.0 Broadcast=192.168. 1.255 gateway = ; Enter the IP address of your router

Save exit

#/sbin/service Network Restart

If the NIC boot is OK, the IP address setting is successful. In addition we can use ifconfig eth0 to display the current IP to verify that the settings are correct.

Use/etc/init.d/network restart to  achieve network startup.

Static IP configuration under Linux "Weber Productions"