Frame Relay) is a group-oriented communication method used to connect to computer systems. It is mainly used for LAN interconnection and WAN connection on public or private networks. Most public telecommunications bureaus provide the Frame Relay Service as a way to establish a high-performance Virtual wide-area connection. Frame relay is a user interface that enters the wide-area group switching network from 56 Kbps to 1.544Mbps.
The following is a case
Use the Xiao fan simulator to use six Routers
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500505510-0.png "title =" image 8.png"/>
The configuration steps are as follows:
FR-1 Configuration
Router> en
Router # config t
Router (config) # line console 0
Router (config-line) # logging synchronous
Router (config-line) # no exec-timeout
Router (config) # frame-relay switching [changed to a frame relay node]
Router (config) # int s0/0 interface]
Router (config-if) # encapsulation]
Router (config-if) # encapsulation frame-relay encapsulate frame relay]
Router (config-if) # frame-relay intf-type dce relay dce]
Router (config-if) # Set clock with clock rate 64000]
Router (config-if) # frame-relay lm-type cisco specifies the signaling type]
Router (config-if) # frame-relay route 100 interface s0/1 101 Forwarding Table]
Router (config-if) # frame-relay route 200 interface s0/2 201 Forwarding Table]
Router (config-if) # enable no sh port]
Router # show running-config view configuration]
Router (config) # hostname FR-1
FR-1 (config) # int s0/1
FR-1 (config-if) # encapsulation frame-relay
FR-1 (config-if) # frame-relay intf-type dce
FR-1 (config-if) # clock rate 64000
FR-1 (config-if) # frame-relay lm-type cisco
FR-1 (config-if) # frame-relay route 101 interface s0/0 100s0/1 access PIPE]
FR-1 (config) # int s0/2
No sh
FR-1 (config-if) # encapsulation frame-relay
FR-1 (config-if) # frame-relay intf-type dce
FR-1 (config-if) # clock rate 64000
FR-1 (config-if) # frame-relay lm-type cisco
FR-1 (config-if) # frame-relay route 201 interface s0/0 200s0/2 inbound and outbound Pipelines]
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500502119-1.png "style =" float: none; "title =" r1pvc.png "/>
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500502000-2.png "style =" float: none; "title =" fr1.png "/>
FR-2 Configuration
Router (config) # hostname FR-2
FR-2 (config) # line console 0
FR-2 (config-line) # logging synchronous
FR-2 (config-line) # no exec-timeout
FR-2 (config) # frame-relay switching
FR-2 (config) # int s0/0
FR-2 (config-if) # encapsulation frame-relay
FR-2 (config-if) # frame-relay intf-type dce
FR-2 (config-if) # clock rate 64000
FR-2 (config-if) # frame-relay lm-type cisco
FR-2 (config-if) # frame-relay route 102 interface s0/1 101
FR-2 (config-if) # no sh
FR-2 (config-if) # int s0/1
FR-2 (config-if) # no sh
FR-2 (config-if) # encapsulation frame-relay
FR-2 (config-if) # frame-relay intf-type dte
FR-2 (config-if) # frame-relay lm-type cisco
FR-2 (config-if) # frame-relay route 101 interface s0/0 102
FR-2 # show frame-relay pvc view Encapsulation]
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500505123-3.png "style =" float: none; "title =" FR-2 # show frame-relay pvc.png "/>
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500505235-4.png "style =" float: none; "title =" r2pvc.png "/>
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500502243-5.png "style =" float: none; "title =" fr2.png "/>
Fr-3 Configuration
Router> en
Router # config t
Router (config) # line console 0
Router (config-line) # logging synchronous
Router (config-line) # no exec-timeout
Fr-3 (config) # int s0/0
Fr-3 (config-if) # no sh
Fr-3 (config-if) # encapsulation frame-relay
Fr-3 (config-if) # frame-relay intf-type dce
Fr-3 (config-if) # clock rate 64000
Fr-3 (config-if) # frame-relay lm-type cisco
Fr-3 (config-if) # frame-relay route 202 interface s0/2 201
Fr-3 (config) # int s0/2
Fr-3 (config-if) # no sh
Fr-3 (config-if) # encapsulation frame-relay
Fr-3 (config-if) # frame-relay intf-type dte
Fr-3 (config-if) # frame-relay lm-type cisco
Fr-3 (config-if) # frame-relay route 201 interface s0/0 202
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500503W1-6.png "style =" float: none; "title =" r3pvc.png "/>
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/050050A51-7.png "style =" float: none; "title =" fr3.png "/>
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500504544-8.png "style =" float: none; "title =" fr3pvc.png "/>
Frame-relay configuration [ospf]
R1
Router (config) # hostname r1
R1 (config) # line console 0
R1 (config-line) # logging synchronous
R1 (config-line) # no exec-timeout
R1 (config) # int s1/0
R1 (config-if) # encapsulation frame-relay
R1 (config-if) # frame-relay lm-type cisco
R1 (config-if) # no sh
R1 (config) # int s1/0.1 point-to-point
R1 (config-subif) # ip add 192.168.4.1 255.255.255.0
R1 (config-subif) # frame-relay interface-dlci 100
R1 (config) # int s1/0.2 point-to-point
R1 (config-subif) # ip add 192.168.5.1 255.255.255.0
R1 (config-subif) # frame-relay interface-dlci 200
R1 (config) # router ospf 1
R1 (config-router) # network 192.168.1.0 255.255.255.0 area 0
R1 (config-router) # network 192.168.4.0 255.255.255.0 area 0
R1 (config-router) # network 192.168.5.0 255.255.255.0 area 0
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500502021-9.png "title =" r1 ip rou.png "/>
R2
Router (config) # hostname r2
R2 (config) # line console 0
R2 (config-line) # logging synchronous
R2 (config-line) # no exec-timeout
R2 (config-line) # int s1/0
R2 (config-if) # encapsulation frame-relay
R2 (config-if) # frame-relay lm-type cisco
R2 (config-if) # no sh
R2 (config) # int s1/0.1 point-to-point
R2 (config-subif) # ip add 192.168.4.2 255.255.255.0
R2 (config-subif) # frame-relay interface-dlci 102
R2 (config) # router ospf 1
R2 (config-router) # network 192.168.4.0 255.255.255.0 area 0
R2 (config-router) # network 192.168.2.0 255.255.255.0 area 0
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500505404-10.png "title =" r2 ip rou.png "/>
R3
Router (config) # hostname r3
R3 (config) # line console 0
R3 (config-line) # logging synchronous
R3 (config-line) # no exec-timeout
R3 (config-line) # int s1/0
R3 (config-if) # encapsulation frame-relay
R3 (config-if) # frame-relay lm-type cisco
R3 (config-if) # no sh
R3 (config) # int s1/0.1 point-to-point
R3 (config-subif) # ip add 192.168.5.2 255.255.255.0
R3 (config-subif) # frame-relay interface-dlci 202
R3 (config) # router ospf 1
R3 (config-router) # network 192.168.5.0 255.255.255.0 area 0
R3 (config-router) # network 192.168.3.0 255.255.255.0 area 0
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/050050A11-11.png "title =" r3 iop rou.png "/>
Result:
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/05005053K-12.png "style =" float: none; "title =" r1 jieguo.png "/>
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/050050J10-13.png "style =" float: none; "title =" r2 jie guoi.png "/>
650) this. width = 650; "src =" http://www.bkjia.com/uploads/allimg/131227/0500506160-14.png "style =" float: none; "title =" r3 jie guo.png "/>
Frame-relay configuration [Static Routing]
R1
Router (config) # hostname r1
R1 (config) # line console 0
R1 (config-line) # logging synchronous
R1 (config-line) # no exec-timeout
R1 (config) # int f0/0
R1 (config-if) # ip add 192.168.1.1 255.255.255.0
R1 (config-if) # no sh
R1 (config-if) # int s1/0
R1 (config-if) # ip add 192.168.4.1 255.255.255.0
R1 (config-if) # ip add 192.168.5.1 255.255.255.0 sec
R1 (config-if) # ip add 192.168.5.1 255.255.255.0 secondary address]
R1 (config-if) # no sh
R1 (config-if) # encapsulation frame-relay
R1 (config-if) # frame-relay lm-type cisco
R1 (config-if) # frame-relay map ip 192.168.4.2 100 ing]
R1 (config-if) # frame-relay map ip 192.168.5.2 200 ing]
R2
Router (config) # hostname r2
R2 (config) # line console 0
R2 (config-line) # logging synchronous
R2 (config-line) # no exec-timeout
R2 (config-line) # int f0/0
R2 (config-if) # ip add 192.168.2.1 255.255.255.0
R2 (config-if) # no sh
R2 (config) # int s1/0
R2 (config-if) # ip add 192.168.4.2 255.255.255.0
R2 (config-if) # encapsulation frame-relay
R2 (config-if) # frame-relay lm-type cisco
R2 (config-if) # frame-relay map ip 192.168.4.1 102
R3
Router (config) # hostname r3
R3 (config) # line console 0
R3 (config-line) # logging synchronous
R3 (config-line) # no exec-timeout
R3 (config-line) # int f0/0
R3 (config-if) # ip add 192.168.3.1 255.255.255.0
R3 (config-if) # no sh
R3 (config-if) # int s1/0
R3 (config-if) # ip add 192.168.5.2 255.255.255.0
R3 (config-if) # no sh
R3 (config-if) # encapsulation frame-relay
R3 (config-if) # frame-relay lm-type cisco
R3 (config-if) # frame-relay map ip 192.168.5.1 202
Static Routing
This article from the "Dan Ning yuan" blog, please be sure to keep this source http://ningxiaoyuan.blog.51cto.com/7600075/1290976