Step by step teach you how to configure a Broadband Router

Correct configuration of a Broadband Router is one of your concerns and brings a lot of convenience to you. Here we will mainly introduce the specific operation of the Broadband Router setting method, including introducing the Broadband Router setting method to prevent unauthorized BT operations. What is the configuration of a broadband router? Mastering the Broadband Router setting method is the premise of surfing the internet, so here to introduce you to the Broadband Router D-Link di-740p model operation, let's take a look at the specific settings details:

Procedure:

First, the default Management address is 192.168.0.1 and the Management port is 8080. Set the IP address of a computer and the router management address in the same network segment. For example, 192.168.0.2. Open the browser of 192.168.0.2 and enter "http: // 192.168.0.1: after 8080, press the Enter key to display the user login prompt window. Enter the default management account and password in the Broadband Router specification to enter the setting interface.

To enable the router to automatically dial, we also need to integrate the ADSL account into the router. Click the "Homepage" tab on the top, and then click "WAN" as the change. In PPPoverEthernet, you can see the place where the ADSL account is set. Enter the applied ADSL account and password and save the settings. Now, go to the "System Information" section in the "system status" tab to check the network status. On the WAN side, you can clearly see the network information obtained by ADSL dialing. After configuring the ADSL account, we can access the Internet through the Broadband Router. However, to better manage and improve security, you need to perform the following operations: click the "Homepage" tab, select "DHCP" on the left and set the ip address range in the ip address range that the DHCP server can enter. After saving the settings, the Broadband Router can automatically assign ip addresses.

How to configure a Broadband Router to prevent unauthorized BT operations:

By default, all computers connected to the vro are protected. That is to say, if they are in the Intranet, the use of p2p software such as bt may be affected. We can use "DMZ" in the "Advanced Settings" label to set the declared host. The host set up here is exposed in the network. On the one hand, you can use bt to download software and create iis and ftp servers without any concerns, and on the other hand, it is also exposed to hackers and viruses, therefore, the security of the computer must be well done. It would be unwise to declare the host only to use p2p software such as bt. In fact, we can use the upnp function to solve the problem that p2p software cannot be used in the intranet. You can click "Other Projects" under the "Tools" tab on the vro settings page and set upnp to "start .)

Go to the filter tag in the broadband router settings interface. We can filter the source and address of the datagram by multiple items, including IP address, url Information, mac address, and region information. Set "Activate" ip address filtering, and enter an IP address within the IP address range, for example, 192.168.0.111. Port information is actually entered in the "port range" field. Because bt downloads ports 6881 to 6889, We can filter them here. Select tcp for "protocol" and "Schedule" to set the time when the filter takes effect depending on the actual situation ).

The service and security of the Broadband Router are both correct.

Hackers and viruses exposed to the internet may exploit vulnerabilities to attack computers. In fact, we can solve this problem by setting up virtual servers. Log on to the Broadband Router settings page. Select the virtual server tag on the Advanced Settings page. Activate the virtual server settings and enter the relevant virtual server information. For example, if we want to allow the computer 192.168.0.112 to provide the ftp service, but want to protect other ports from the vro, we can simply virtualize the ftp service. Set the personal IP address to 192.168.0.112, the Protocol mode is tcpftp service uses tcp), and the personal port 21ftp uses port 21 ). In addition, you can set the time period for this virtual service to take effect in the "arrange" area.