Stm32 cannot enter software emulation

Today, in software emulation, it is found that the IO port to be observed cannot be entered in the logic emulator because of configuration issues under the Debug option.

The default configuration is:

Dialog DLL:DCM. Dll

Parameter:-pcm3

Change to the following configuration to enter the logical simulation:

Dialog dll:darmstm. Dll

Parameter:-PSTM32F103VC

Note: When you perform a logic simulation, the input portb.5 indicates that the 5th pin of the GPIOB is emulated, and be careful to check whether the emulation type is analog (analog), number (Bit), or status (States).

This article is from the "whatever957" blog, make sure to keep this source http://whatever957.blog.51cto.com/6835003/1629580

Stm32 cannot enter software emulation