Summary: Lan router configuration methods

Source: Internet
Author: User

When using the LAN router configuration method, the LAN router configuration method is often optimized, as well as the WAN port connecting to the wireless router and related problems. Here we will introduce the solutions to many problems involved.

Summary: Lan router configuration methods

With the popularity of wireless networks, wireless routers gradually enter our lives. However, if you buy a wireless router, and how to configure a wireless router, this has become an important issue.

Most users who have been familiar with broadband routers know that the ports on the broadband routers are divided into WAN ports and LAN ports. A Broadband Router has the following features during work: data streams from the LAN to the WAN are not restricted by default through the router, and data streams from the WAN to the LAN are not allowed by default. Note: The wireless access part of the Wireless Broadband Router belongs to the LAN range. That is to say, packets sent from the computer in the LAN are sent to the LAN port of the router by default, the router can be sent from the WAN port smoothly through the router, but after the Active packets from the WAN end enter the WAN port, the router will not let those packets pass by default.

Through the actual test of the mouse, the network cable connected from the wired router can be connected to the WAN port and LAN port of the wireless router to achieve the use of the wireless network. Note: the premise of this article is that you have a network cable connected from a normal wired router. This network cable is connected to the WAN port of the wireless router through a static IP address, for example, the LAN port connected to the wireless router is used as a Wireless AP. The following LAN router configuration method describes two Connection Methods:

The wireless router used by the mouse is TP-link R460 and TP-link WR541G. Therefore, the first connection method is: connect the WAN port of the wireless router: R460 LAN port --- WR541G WAN port. The second connection method is: connect the LAN port of the wireless router: r460 LAN port --- WR541G LAN port.

I. Lan router configuration method: connect to the WAN port of the Wireless Router

That is: R460 LAN port --- WR541G WAN port. Assume that the R460 LAN port uses the default IP address 192.168.1.1, you can enter the R460 router settings through 192.168.1.1, and R460 is properly set and you can access the internet) first, use a network cable on a computer to connect to the wireless router WR541G) LAN port. The default setting interface is 192.168.1.1, and other wireless routers are based on the actual default IP address ); first, enter the LAN interface in the wireless router WR541G, set it to 172.16.1.1, and then save and restart the router. Then, the default IP address of the wireless router WR541G will be changed to 172.16.1.1.

Then, in the current computer Nic attribute, change the IP address to 172.16.1.X in the range of 2-254). For example, after setting, open IE and enter 172.16.1.1 in the address bar, enter the WR541G configuration interface of the wireless router, set the WAN port of the wireless router, select the static IP address in the WAN port connection type, and set it to: IP address 192.168.1.X (X takes the natural number range 2-254) subnet Mask 255.255.255.0 Default Gateway 192.168.1.1. Note that IP address 192.168.1.X, where X must have never been used in the LAN, otherwise it may cause a conflict.

After the connection is complete, check the connection status of the wireless router WR541G as follows: after the configuration is complete, save and restart the wireless router WR541G. For network wireless network settings, refer to the previous Wireless LAN (router) installation and configuration process on the home page. Description: Why do we need to set the lan ip address of the wireless router first. This is because the LAN port IP address of R460 is its default gateway address for the wireless router WR541G. Because the default IP address of the wireless router WR541G is 192.168.1.1, and the default IP address of R460 is 192.168.1.1; therefore, to avoid IP conflicts between the two, you must set the default IP address of the wireless router WR541G.

◆ At this time, the IP address of the wireless network adapter must be set to 172.16.1.X (the X value ranges from 2 to 254), and the gateway and DNS can be set to 172.16.1.1. However, if the wireless router WR541G enables the DHCP service, you may not need to set it. However, the mouse is not set successfully.

◆ Enter the IP address set for the vro. The R460 wired router is 192.162.1.1 WR541G 1g wireless router is 176.16.1.1, And the LAN router configuration method is as follows.

◆ After the connection is completed, the wireless router WR541G also functions as a router. Therefore, the TCP/IP attributes of the computer connected to the wireless router WR541G must be consistent with that of the wireless router WR541G!

Ii. LAN router configuration method: connect to the LAN port of the Wireless Router

That is: R460 LAN port --- WR541G LAN port. Assume that the R460 LAN port uses the default IP address 192.168.1.1, you can enter the R460 router settings through 192.168.1.1, and R460 is properly set and you can access the internet) this connection method is simple because the WAN port of the wireless router WR541G is not required to configure the WAN port. In the wireless router WR541G default IP address is 192.168.1.1, click IE, enter 192.168.1.1, enter the wireless router WR541G settings interface, click DHCP server-DHCP service, disable the DHCP server.

Then, change the LAN port IP address of the wireless router WR541G, for example, to 192.168.1.254, as long as it does not conflict with other used IP addresses. After the configuration is complete, the connection status of the wireless router WR541G is as follows. Because the wireless router WR541G only provides the wireless routing function, the connection status is empty. the settings are complete. Save and restart the settings. For network wireless network settings, refer to the previous Wireless LAN (router) installation and configuration process on the home page.

◆ Because the IP addresses of the wireless router WR541G and the wired router R460 are both 192.168.1.1, do not associate the network connected by the R460 router first when setting the wireless router WR541G.

◆ After configuring the wireless router WR541G and connecting to the R460 router in parallel, enter the IP address of the wireless router WR541G: 19.02.1.254 (what is the IP address of the LAN port of the wireless router you set here, ). The connection IP address of the R460 router is 192.168.1.1.

◆ LAN router configuration method: after the connection, the wireless router WR541G only provides the wireless routing function. Therefore, when entering different vro settings, be sure to enter different IP addresses to access different vro settings. The wireless router WR541G is equivalent to a "wireless switch", so the TCP/IP attributes of the computer connected to WR541G must be consistent with that of R460! This is equivalent to connecting these computers under R460!

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.