Summary of AR0134 960p global shutter camera module based on Icamera test

Summary of AR0134 960p global shutter camera module based on Icamera test

First look at the features of this module

AR0134

Global Exposure CMOS module

1280*960 pixels |

5.3 V/lux-sec

Camera Module physical beautiful photo (above is Icamera test backplane link)

、

External interface currently available on camera

For this series of cameras, the chip is different, d0-d6 may be reversed, need special confirmation, just, AR0134 is not corresponding, but for Icamera only with high 8bit, all only low 3bit does not correspond, can also reluctantly out of the diagram

Specific correspondence, you need to view the drawings.

In order to use the AR0134 camera module with our CC1601 board link, you need to link with the CB1602 board, you can link the test backplane (this adapter board is mainly used for mt9f002).

Specific effect reference

Using Icamera for testing

Firmware usage: ICAMERA_NOINIT.IIC

Configuration file: Ar0134_full_raw.icfg

You can see this configuration file:

Resolution: 1280*1024

Frame rate: 15fps

Although only 5bit high, but the image can still be viewed, mainly used to test the camera image effect

If you need to get better picture quality, try to re-create the adapter board or link to the fly line.

Photo effects are as follows

Summary of AR0134 960p global shutter camera module based on Icamera test