Summary of mt9m034 1280x960 High Dynamic Camera module based on Icamera test

Summary of mt9m034 High dynamic camera module based on Icamera test

First look at the features of this module

mt9m034

High Dynamic CMOS module

1280*960 pixels |

5.48 v/lux-sec

"115db

Camera Module physical beautiful photo (above is Icamera test backplane link)

、

External interface currently available on camera

For this series of cameras, the chip is different, d0-d6 may be reversed, need special confirmation, just, AR0134 is not corresponding, but for Icamera only with high 8bit, all only low 3bit does not correspond, can also reluctantly out of the diagram

ps:mt9m034 line sequence with AR0134 is exactly the same, users can confirm the control, here to ar0134 as a reference,

Specific correspondence, you need to view the drawings.

In order to use the MT9M034 camera module with our CC1601 board link, you need to link with the CB1602 board, you can link the test backplane (this adapter board is mainly used for mt9f002).

Specific effect reference

Using Icamera for testing

Firmware usage: ICAMERA_NOINIT.IIC

Configuration file: Mt9m034_full_raw.icfg

You can see this configuration file:

Resolution: 1280*960

Frame rate: 15fps

Although only 5bit high, but the image can still be viewed, mainly used to test the camera image effect

If you need to get better picture quality, try to re-create the adapter board or link to the fly line.

Photo effects are as follows

More https://item.taobao.com/item.htm?&id=529532291977

Summary of mt9m034 1280x960 High Dynamic Camera module based on Icamera test