Summary of mt9m034 High dynamic camera module based on Icamera test
First look at the features of this module
mt9m034
High Dynamic CMOS module
1280*960 pixels |
5.48 v/lux-sec
"115db
Camera Module physical beautiful photo (above is Icamera test backplane link)
、
External interface currently available on camera
For this series of cameras, the chip is different, d0-d6 may be reversed, need special confirmation, just, AR0134 is not corresponding, but for Icamera only with high 8bit, all only low 3bit does not correspond, can also reluctantly out of the diagram
ps:mt9m034 line sequence with AR0134 is exactly the same, users can confirm the control, here to ar0134 as a reference,
Specific correspondence, you need to view the drawings.
In order to use the MT9M034 camera module with our CC1601 board link, you need to link with the CB1602 board, you can link the test backplane (this adapter board is mainly used for mt9f002).
Specific effect reference
Using Icamera for testing
Firmware usage: ICAMERA_NOINIT.IIC
Configuration file: Mt9m034_full_raw.icfg
You can see this configuration file:
Resolution: 1280*960
Frame rate: 15fps
Although only 5bit high, but the image can still be viewed, mainly used to test the camera image effect
If you need to get better picture quality, try to re-create the adapter board or link to the fly line.
Photo effects are as follows
More https://item.taobao.com/item.htm?&id=529532291977
Summary of mt9m034 1280x960 High Dynamic Camera module based on Icamera test