Summary of several network CMD commands most commonly used by Windows

Summary of several network CMD commands most commonly used by Windows http://www.cnblogs.com/sbaicl/archive/2013/03/05/2944001.html

First, Ping

The main test is the correctness of the TCP/IP protocol configuration and current network status.

The basic usage format for the ping command is: ping IP address/hostname/domain name [-T] [-a] [-N Count] [-l size]

- T: Ping the IP address/hostname/domain name continuously until the user is interrupted by CTRL + C.

-A : Displays the destination host network address in IP address format, the default option.

- N Count: specifies how many times to ping, specified by count, and the default value is 4.

- L Size: Specifies the length of data sent in the ping command, and the default value is 32 bytes.

Second, netstat

It mainly helps to understand the overall network situation and the current connection situation.

Basic use of command format:netstat [-n] [-a] [-e] [-r][-s]

- N: shows all valid connections that have been established.

- S: This option displays its statistics according to the respective protocols. If your application (such as a Web browser) is running slowly, or you cannot display data such as a Web page, then we can use this option to look at the information that is displayed. We need to look at the rows of the statistics, find the wrong keyword, and identify the problem.

- e: This option displays statistical data about Ethernet. The items it lists include the total number of bytes sent, the number of errors, the number of deletes, the number of datagrams, and the number of broadcasts. These statistics have both the number of datagrams sent and the number of datagrams received. (This option can be used to count some basic network traffic)

- R: This option displays information about the routing table and displays the currently valid connection in addition to showing valid routes.

-A : This option displays a list of all valid connection information, including established connections (established), and those that listen for connection requests (LISTENING).

Third, Ipconfig

The main idea is to understand the values set by the current TCP/IP protocol, such as IP address, subnet mask, default gateway, MAC address, and so on.

Basic method of Use : ipconfig [/all/release/renew]

ipconfig: when no parameter option is present, it displays the IP address, subnet mask, and default gateway value for each interface that has been configured.

/all: When you use the All option, you can display additional information (such as IP addresses, etc.) that it has configured and uses for DNS and WINS servers. and displays the physical address (MAC) built into the local network card. If the IP address is leased from a DHCP server, it displays the IP address of the DHCP server and the date the leased address is expected to expire.

/release &/renew : Here are two additional options that can only work on computers that lease their IP addresses to a DHCP server. If I enter Ipconfig/release, then the leased IP address of all the interfaces To the DHCP server (returning the IP address). If you enter Ipconfig/renew, the local computer tries to contact the DHCP server and leases an IP address. Note that in most cases, the NIC will be re-assigned to the same IP address that was previously given.

Iv. Route

Used primarily to configure routing and to view current routing conditions.

Basic usage:route [Print] [add] [change] [delete]

Print : The main printing is the current routing situation.

Add : manually adding routes or routing with the following example:

route ADD 157.0.0.0 MASK 255.0.0.0  157.55.80.1 METRIC 3 IF 2  destination^ （目标地址）  ^mask      ^gateway   metric^    ^                                                   Interface^ (接口)

Change : only used to modify the gateway and/or metric. Examples are as follows:

route CHANGE 157.0.0.0 MASK 255.0.0.0 157.55.80.5 METRIC 2 IF 2

Delete : deletes the route. Examples are as follows:

route DELETE 157.0.0.0

Wu, tracert (Trace router abbreviation, for Route trace command)

It is primarily used to display a set of IP routers that pass packets from the computer to the target location, and the time required for each hop (that is, the trace datagram routing path) to test for network connectivity issues.

基本用法: tracert [-d] [-h maximum_hops] [-j host-list] [-w timeout]                　　　　　　　　　[-R] [-S srcaddr] [-4] [-6] target_name(目标IP、URL或域名)选项:    -d                 不将地址解析成主机名.    -h maximum_hops    搜索目标的最大跃点数.    -j host-list       与主机列表一起的松散源路由(仅适用于 IPv4).    -w timeout         等待每个回复的超时时间(以毫秒为单位).     -R                 跟踪往返行程路径(仅适用于 IPv6).    -S srcaddr         要使用的源地址(仅适用于 IPv6).    -4                 强制使用 IPv4.    -6                 强制使用 IPv6.

Vi. ARP (Address Resolution, Protocol, is a TCP/IP protocol that acquires a physical address.)

Used primarily to view the current contents of the ARP cache on the local computer or another computer.

Basic usage:ARP [-a/g] [-S] [-d]

-A: Used to view all items in the cache, the-A and-G parameters have the same result.

-S: Manually enter a static ARP entry into the ARP cache.

-D: Deletes the contents of the ARP cache.

Summary of several network CMD commands most commonly used by Windows