Summary of the method of using Mbrostool tool to make multi-boot disk

A time ago wrote a personal five-in-one multi-boot disk sharing-for the maintenance of entertainment, WiFi password hack, win&mac login password bypass/clear, feedback of the classmate or quite a lot, I think we all have this aspect of the demand, then the use of their own experience to summarize.

The original address of the software: http://bbs.wuyou.net/forum.php?mod=viewthread&tid=330493&extra=page%3D1. I hope that you will give a lot of valuable advice and advice to M. Many versions of the software have been updated, and the features of the different versions have been deleted as needed.

Let's talk about it. A summary of how to make a local hard disk multi-boot disk using the Mbrostool tool:

The method is similar to the production on a USB stick. However, there are differences, you can refer to: The use of mbrostool tools to create a U disk multi-Boot disk method summary

Objective: In order to install the multi-system boot disk on the local hard disk, including PE system, some linux,konboot and so on many other systems, and these systems are hidden, will not be formatted off, also antivirus. This is the advantage of this tool.

The difference between the local hard disk and the USB stick is that the local hard disk starts faster, and is convenient, for example, if you install the PE to the local hard disk, then the computer problem will not use a USB flash drive, directly on the local start of the PE repair.

MBT tools have low-end format and high-end format, multi-UDM need to use low-end format, and like F3 emergency mode this need to use high-end format, low-end format and high-end format is the difference between low-end format Our multiple systems are hidden write to disk header, And the end of the disk need to leave a portion of the free partition (about 40MB), the USB flash drive will automatically generate a small part of the tail free partition

However, the local disk will not be automatically generated, so you need to manually split, and high-end format is to hide multiple systems to write to the tail of the disk, but the low-end USB flash drive When we make the flash drive can be formatted, so no other, direct write can, two local disk we need to keep the data above the disk, So what do we do? There are files in C, we need to leave a portion of the disk in front of the C drive and not format the disks as follows,

First make sure that the C drive has enough space, then right-click on the C drive and select Resize partition

Then you can drag, or you can manually fill in the front of the C drive to leave a portion of space, because the C drive inside the original data, so will be the C-drive data back to move, so it will be very slow, if the C drive no data then will be very fast,

I personally only left the 3GB, after the format of the time if you choose General EFI, then you need a small portion of the disk at the end of the free partition (General 40MB can), if the format of the choice of non, then there is no need for the tail of the small portion of the free partition.

The following officially began,

First insert the USB flash drive, then open the software

The default is not to display the local hard disk, so you need to click Show All Disks

Then select my hard drive

Click on Common--formatting.

Or simply click on the icon in the.

Pop

Remember not to check the Rebuild partition table, this step is not the same as on the USB flash drive, after the tick will erase all the data on the local hard disk,

Then we can make a multi-boot disk, the production process only need to drag a grid, for example, we have to make 3 of systems, then select three partitions

Then drag the system image you want to make.

It can be either an ISO file or an unpacked folder of these ISO files, but it must be the last level folder or manually click

To select the system image file,

You can wait for it when you drag it in, or you can click to unlock it and use it without a steel disc.

Then you can select either universal EFI or non by checking the

Do not check the Rebuild partition table, and then recommend that you can choose general EFI, but the recommended choice of non, so as not to give a small portion of the end of the disk free partition, but will affect the R disk, but also see the user area, but in the Windows environment will see this user area, so if you choose Non, Then it is recommended that the size in front of one of the system images

Double-click to have the current system (the sub-disk) occupy all the space remaining in the free partition so that the user area is not visible in the Windows environment.

Backup needs to be checked, because some of the system or function will block the main menu, backup can be restored, general USB flash drive without backup.

After the production of many systems in the hidden partition, anti-virus, and then the user area and the normal use of a USB stick, but the default User area is NTFS format, this type of log file system compared to hurt U disk, so you can change to FAT32. The final effect is as follows, and you can also refer to http:// Www.cnblogs.com/shenjieblog/p/5138846.html

You can also set the password and some other settings please refer to: A summary of the method of using Mbrostool tool to make multi-boot disk

Have questions can feedback, qq:970852638

Summary of the method of using Mbrostool tool to make multi-boot disk