Summer Laptop Cooling Tips

In the summer the weather becomes sultry, the people who have used the notebook know that it has a bad heat dissipation, especially the current notebook constantly updated, performance is getting higher, so the heat has become a small trouble.

Tools/raw Materials

Multifunction screwdriver

Air-conditioning Tube

Method/Step

1

First want to have a good heat dissipation space, must give the laptop a comfortable and cool environment. It is best to be ventilated, dry and tidy.

2

The heat of the notebook is not good, we can buy a radiator fan to blow it. This will speed up the heat distribution.

3

Laptops cannot be used for long periods of time, such as playing games and watching high-definition movies. If you can't help but want to play, it's OK, but be sure to control the time of the fun game. It is best to control it between 3-5 hours to keep the internal heat from circulating effectively.

4

Buy an external USB small fan and use a separate power supply, the fan must not be on the laptop cooling hole blowing, along the direction of the cooling hole is correct.

5

Notebook used for a long time, inside will also plug a lot of dust, as long as the inside a clean space to effectively play the heat. Then how to clean up the dust has become a problem that can not be ignored. If it is not over warranty, do not disassemble it. For beginners, the first preparation is to go to the official website or other web site to check their own internal architecture diagram, preferably the more detailed the better. Then it is necessary to open the back of the notebook, open the time must be careful not to rush, especially when loose screws, first each screw a little loose and then all removed. When you pick up the back cover, you should also pay attention to a point, around the foot of the place do not use brute force, toward the focus point gently pull up, while lifting a little finally completely picked up. To avoid damage to the motherboard. When cleaning the dust to use paper to cover the CPU and the GPU, you can use a brush to sweep the fan and heat hole position, where more dust. Then use the hair dryer to clean the dust off the motherboard. Finally cover the back of the cable screws, cable screws with the same as the loose screws, the first time to tighten a little bit and then each twist tight.

6

For the heat sink, most of the CPU and GPU are fixed on the motherboard, the CPU is under the fan, there are now some use copper plate heat conduction through the CPU fan and then the internal heat to send out. Anyway, the layout of the time is long, heat conduction will also appear undesirable phenomenon, so change the heat sink is also a key.

Note : More attention to the computer Tutorials section, triple Computer office group: 189034526 welcome you to join