Sun 2540 storage configuration document (notes) 1. Click unlabeled-configuration file 2. Create the configuration file scada_profile and select the size of the raid1 segment. The size of the 512 k pre-read disk is enabled. The number of the variable disk type sas3. Click the storage pool and select the default storage configuration file. scada_profile4 created, select two disks as the hot spare disk for the physical device 5, click New volume-use the first storage pool for the volume --- Select ---- default select the disk not allocated to the retaining wall (create the heart virtual Disk) select the specified disk to be used-select all disks from the specified image pair-configure one or two volumes-enter the volume name scada_log, and set the number to 1 and the size to 600 GB, select B as the controller (here, two Luns on each machine, one for log, the other for database log to go through the B controller, and the database to go through the control) 6. Select ing to the default storage domain (this is a problem, it is best to create a host group. Select ing to new hosts. 7. Select the default storage domain for the host group, number of Luns: 1 click to finish ------------------------------------------- 2 then follow the above method to create scada_data size for the remaining space configuration volume ---- enter the volume name scada_log, the number of creation is 1, you do not have to know, select the second option in the previous step, that is, use the remaining space, controller select A =================================================== ================== 3. Collect logs in the upper right corner ---- service consultant ------ collect supported data ==================== =================================================================4 the multi-path software stmsboot-eformat of devfsadm is assumed to be 2 partitions. If it is 0 p, check the current partition p l save quit newfs/dev/rdsk/***** if the s0 value exceeds 2 T, you can add parameters on your own. run man to mount/dev/dsk/***** s0/mnt (my directory) vi/etc/vfstab ==================================== ====================== 012 the entire partition, cannot modify 34567 ======================================================== ========================