SuperLink Network Tester

SuperLink network tester is a multi-link, multi-procedure testing instrument. It is mainly used to test and analyze various communication protocols of the telephone network, ISDN network, GSM network, and CDMA network. At the same time, the powerful data statistics function of this instrument also facilitates the daily maintenance of the equipment.

One platform supports testing of multiple networks and their procedures
7 signaling --- support for testing all protocols of 7 signaling MTP, TUP, SCCP ...)
Integrated Business digital network-ISDN procedure Test DSS1 and ISUP)
Mobile Communication Network --- digital mobile network test GSM and CDMA)
Intelligent Network --- Intelligent Network Test INAP)
Access Network --- V5.1/V5.2)
Adapt to the comprehensive needs of communication network procedure Testing

Physical Layer, data link layer, network layer...
Multi-Protocol, multi-function, multi-window, multi-task, multi-link, multi-time slot WINDOWS-based application software design, easy operation, user-friendly interface, large-capacity storage, dual-performance processor collaborative work, supports high-load, high-speed processing capability, free choice of display mode, unified platform, flexible configuration of various procedures Test Module

Typical applications: acceptance testing, fault locating, routine maintenance, performance analysis, call tracing, and statistical reports

Monitoring, recording, analysis, and statistics
Pre-filter, post-filter, capture information, detect errors, Edit information...
Powerful real-time data analysis and statistics functions
Flexible report output format: You can customize the data storage mode to easily generate text files, EXCEL files, WORD files, etc.
8/16 two-way link set on a portable instrument

Features

Function configuration

Flexible selection and configuration of various test functions, integrating TUP, ISUP, MAP, BSSAP, INAP, CAP, and OMAP, provides a complete test solution for the exchange network.
Multi-Window and multi-task functions facilitate analysis of test results.
The multi-link and multi-time slot test function is provided to meet the needs of the development of the exchange network. The color of the link time slot is freely defined, so that messages of each link can be easily distinguished.
Real-time display of The Link Interface status for easy observation of the device status.

Message flow view

The unique Chinese and English display can be switched at any time to help different users analyze the test results.
You can flexibly adjust the display mode and format to meet the needs of different application scenarios.
Multi-Window, multi-task, message flow observation and statistical result query and data analysis. Protocol statistics
Multiple Protocol statistical methods are provided to help you determine network operation conditions.

Test Result Analysis

The real-time call Process Analysis Function facilitates on-site test and analysis.
The powerful filtering function filters test results based on a variety of combination conditions.

Automatic Report Generation

Various statistical reports are generated automatically and can be converted to TXT text or Excel forms to facilitate report design and processing.

Product features and advantages

Up to 8 links/16 links can be tested at the same time and concentrated in a portable box. It can be used on large network nodes and monitor all signaling signals of multiple interfaces at the same time for ease of use.
Database-based data storage and processing methods provide powerful data statistics and analysis capabilities. data can be analyzed according to various needs and can be set to flexible and diverse report formats for easy printing and output.
Various file output methods allow you to automatically generate TXT files and EXCEL files. You can use a variety of flexible analysis tools to customize the report format and facilitate remote data analysis.
The device running status is analyzed by statistics on the number of different message types.
Massive processing and storage capabilities allow simultaneous testing and processing and analysis of links with multiple large traffic loads.
Scalable link interfaces facilitate the expansion of the number of links to adapt to future applications and maximize the convenience of users for reasonable use of funds.
Modular Software and Hardware Design. A single platform supports multi-procedure testing to facilitate the expansion of functions of the instrument. Main technical indicators

Input Port: high-impedance, 75Ω, and 120 Ω external configuration options)
Input Interface speed: 2048 kbit/s ± 100ppm
Display: 12.1 inch TFT LCD
Processor: Pentium/586 or above
Peripheral interface settings: 3.5 inch floppy disk drive, printer parallel interface, serial interface, external VGA display interface, LAN interface
Body product: 40. 5cm long) X 20cm wide) X 27. 5cm high)
Weight: 9 kg
Work temperature: 0 ℃-40 ℃
Power Source: AC 220v ± 10 ﹪
Standard attachment: User Manual, test line, and dedicated hosts

LITE 3000/3000 E

Cost-effective testing and Fault Locating solutions for GSM/GPRS, transmission, switching, and access

Features

Quick troubleshooting
Synchronous monitoring of 2 Mbit/s PCM Transmission Lines
Powerful n×64k bit/s framing and 2 M bit/s PCM System Non-framing Testing
G.821, G.826, or M.2100 fault Performance Testing
Test the-bis interface in the GSM network
Advanced tier signaling analysis options
-GSM protocol
-SS7 Protocol
-ISDN Protocol
-CAS and MF Signaling
-Powerful signaling statistics
-Measurement Result Filter
Transfer Time Measurement
Drop-and-insert test function
Large Screen color display
Simple and intuitive operation
Automatic Configuration of monitoring line parameters
Battery life over 10 hours
Overview
Our LITE 3000 is a handheld multi-function telecommunications testing instrument for 2 Mbit/s PCM Systems.

LITE 3000 can be used in a range of test projects: from rapid troubleshooting to comprehensive and in-depth analysis of transmission and order problems. The additional options allow LITE 3000 to be upgraded from a fully functional PCM transmission tester to an advanced signaling analyzer.

The basic configuration of LITE 3000 includes two independent receivers and one sending end, supporting frame and non-frame testing and monitoring. LITE 3000 is an ideal service testing and disconnection Tester for fast locating of 2 Mbit/s PCM transmission faults.

LITE 3000 displays alarms and transmission link status through LED indicators. The two receivers can monitor the transmission information on a bidirectional PCM link and compare the recorded data at the same time.

LITE 3000 provides an option to test the-bis interface and A interface signaling of the GSM network. Other options allow LITE 3000 to add the 7th signaling, ISDN Protocol, and CAS/MFC signaling test functions.

LITE 3000 displays the test results through a super-large color LCD screen. The color graphic operation interface and automatic configuration greatly increase the ease of use of the instrument. In addition, as an option, you can remotely control LITE 3000. Test results and data can be printed or output to a soft copy.

LITE 3000 is lightweight and flexible so that it can meet a variety of test needs anytime and anywhere. The high-performance rechargeable and replaceable NiMH battery enables the instrument to work continuously for more than 10 hours in an environment without AC mains supply. For longer working hours, you can use an external power supply.