Support for Mac add Android device

1. Plug the Android device into the Mac computer

2. First you can look at this Mac computer before you have added this, command: ADB devicesif shown, the following words, the description has been added before, the following can not be looked at. List of devices attached

42f6940daa32bf91device

 3. Add Android Device First step:Open Terminal, enter: System_profiler spusbdatatype command to view information about connected USB devices (lots of information can be found) Samsung_android:

Product id:0x6860
Vendor id:0x04e8 (Samsung Electronics Co., Ltd.)
version:4.00
Serial number:42f6940daa32bf91
Speed:up to 480 Mb/sec
Manufacturer:samsung
Location ID:0X1D110000/6
Current Available (MA): 500
Current Required (MA): 96 4. Enter: VI ~/.android/adb_usb.ini command, add 0x04e8 in open Adb_usb.ini file, and save exit

5. Enter the Android development environment found, can already find the Samsung phone

Sometimes the ADB devices can not display the connection device, need to unplug the data cable, plug in several times, and exit the terminal, and then re-open, and then enter the command to find the connected device

Support for Mac add Android device