Hello! BOOT0 is starting!
Boot0 version:2.0.0
Read DRAM para.
DRAM driver version:1.15
DRAM size =1024MB
0x7b7afe7f
Super_standby_flag = 0
Succeed in opening NAND flash.
Block from 2 to 6
Deal Block 2
Succeed in reading Boot1 file head.
The size of BOOT1 is 0x00068000.
The file stored in 0x00000000 of Block 2 is perfect.
Check is correct.
Ready to disable Icache.
Succeed in loading BOOT1.
Jump to Boot1.
[0.149] Boot1 version:2.0.0
[0.158] script installed early OK
[0.158] PMU type = 3
[0.160] Bat vol = 0 mv
[0.176] Axi:ahb:apb=4:2:2
[0.176] Set dcdc2=1400mv, clock=912m successed
[0.178] Key
[0.191] No key found
[0.191] Flash init start
[0.191] Nb1:enter Nfb_init
[0.194] Nb1:enter PHY Init
[0.197] [NAND] NAND driver (b) version:0x0x00000002, 0x0x00000012, data:0x20130325
[0.207] Get the good blk ratio from hwscan:944
[0.210] Nb1:nand PHY init OK
[2.023] _repairlogblktbl start
[2.025] [DUBG], check free block 0X000003FD ok!
[2.514] Log Block Index 0x00000000, logicblocknum:0x00000091, logblocktype:0x00000001
[2.517] log0:0x0000003e, LOG1:0X000003FD, writeindex:0x00000000
[2.524] Datablock:0x000003a7, lastusedpage:0x00000062
[2.531] [DUBG], check free block 0X000003FC ok!
[2.923] Log Block Index 0x00000001, logicblocknum:0x00000170, logblocktype:0x00000001
[2.926] log0:0x000003a8, LOG1:0X000003FC, writeindex:0x00000000
[2.932] datablock:0x000000cc, Lastusedpage:0x000000ee
[2.940] [DUBG], check free block 0x000003f9 ok!
[3.465] Log Block Index 0x00000002, logicblocknum:0x00000171, logblocktype:0x00000001
[3.468] Log0:0x000003a5, LOG1:0X000003F9, writeindex:0x00000000
[3.475] Datablock:0x000003b6, lastusedpage:0x00000032
[3.482] [DUBG], check free block 0x000003f8 ok!
[3.934] Log Block Index 0x00000003, logicblocknum:0x000000f0, logblocktype:0x00000001
[3.937] Log0:0x000003ae, Log1:0x000003f8, writeindex:0x00000000
[3.943] Datablock:0x000003b7, lastusedpage:0x0000009a
[3.949] _repairlogblktbl End
[4.005] Nb1:init OK
[4.006] Flash init finish
[4.031] FS init OK
[4.033] Fattype FAT16
[4.033] FS Mount OK
[4.038] NAND good_block_ratio=944
[4.038] Storage_type=0
[4.083] 13
[4.235] wrn:l232 (COMMON/UI/DISPLAY_INTERFACE/DISPLAY_INTERFACE.C): Fetch script data Boot_disp.output_type fail
[4.240] wrn:l268 (COMMON/UI/DISPLAY_INTERFACE/DISPLAY_INTERFACE.C): Fetch script data Boot_disp.output_mode fail
[4.250] wrn:l288 (COMMON/UI/DISPLAY_INTERFACE/DISPLAY_INTERFACE.C): Fetch script data BOOT_DISP.AUTO_HPD fail
[4.260] Lcd0_para.lcd_used=0
[4.263] 0
[4.466] 1
[4.667] 2
[4.868] 3
[5.069] 4
[5.270] 5
[5.471] TV detect, ret = 0
[5.471] No device plug
[5.471] Key value = 0
[5.474] Recovery key High 6, low 4
[5.577] Show pic finish
[5.577] Load kernel start
[5.607] Load kernel successed
[5.607] Start address = 0x4a000000
[6.373] Jump to
U-boot 2011.09-rc1-00000-g156f5d7-dirty (2013-17:10:23) Allwinner Technology
Cpu:sunxi Family
Board:sun7i-evb
Dram:1 GiB
NAND: [NAND] set Nand_good_block_ratio 944
3776 MiB
In:serial
Out:serial
Err:serial
--------FastBoot Partitions--------
-total partitions:11-
-name--start--size-
bootloader:8000 8000
env:10000 8000
boot:18000 8000
system:20000 100000
data:120000 200000
misc:320000 8000
recovery:328000 10000
cache:338000 a0000
private:3d8000 8000
databk:3e0000 80000
udisk:460000 300000
-----------------------------------
Bootcmd Set Setargs_nand
Hit any key to stop autoboot:0
Starting kernel ...
[0.700067] aw_pm_init:not support Super standby.
[0.736718] SW_AHCI sw_ahci.0:sata power enable do not exist!!
[0.997850] ctp_fetch_sysconfig_para:ctp_unused.
[1.038600] [+++bluesleep+++]bluesleep_probe:bluesleep_probe line 639
[1.038607]
[1.047626] [Gpio-err] __pio_to_irq:invalid Pio to IRQ
[2.972625] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
[2.980918] Ata1:irq_stat 0x00000040, connection status changed
[2.987656] Ata1:serror: {commwake devexch}
[3.686192] init:to sleep 1 seconds.
[4.690391] Init:has waken up.
[4.694017] init: [William] Hdmistatus = 0!
[4.698712] init: [William] Tvstatus = 0!
[4.703825] Init:width = 1280
[4.707265] init:height = 720
[4.710695] init:s.st_size = 3686400
[5.222948] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
[5.231232] Ata1:irq_stat 0x00000040, connection status changed
[5.237990] Ata1:serror: {commwake devexch}
[5.828229] Init:do_umount:/data
[6.135101] Init:do_umount:/cache
[6.235068] Init:dont need format/dev/block/udisk
[6.242031] Init:dont need format/dev/block/private
[6.268626] Init:do_umount:/DATABK
[6.438198] init:cannot find '/system/etc/install-recovery.sh ', disabling ' flash_recovery '
[7.367001] Android_usb:already disabled
[7.371927] init:using deprecated syntax for specifying property ' Sys.usb.config ', use ${name} instead
[7.384069] init:using deprecated syntax for specifying property ' Sys.usb.config ', use ${name} instead
[7.473275] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
[7.493643] Ata1:irq_stat 0x00000040, connection status changed
[7.502565] Ata1:serror: {commwake devexch}
[9.772993] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
[9.781274] Ata1:irq_stat 0x00000040, connection status changed
[9.788040] Ata1:serror: {commwake devexch}
[12.023289] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
[12.031608] Ata1:irq_stat 0x00000040, connection status changed
[12.038421] Ata1:serror: {commwake devexch}
[14.272529] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
[14.280813] Ata1:irq_stat 0x00000040, connection status changed
[14.287660] Ata1:serror: {commwake devexch}
[16.532966] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
[16.541285] Ata1:irq_stat 0x00000040, connection status changed
[16.548046] Ata1:serror: {commwake devexch}
[18.782663] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
[18.790936] Ata1:irq_stat 0x00000040, connection status changed
[18.801067] Ata1:serror: {commwake devexch}
[21.033287] ata1:exception emask 0x10 sact 0x0 SErr 0x4040000 Action 0xe Frozen
Swiftboard Startup information