Switch Port Speed Limit

Switch Port Speed Limit
1. Enable qos Switch (config) # mls qos 2. Define the name of the access control list (wy2) Switch (config) # access-list wy2 permit 192.168.254.0 0.0.255 3. Define the class name, and bind it to the access control list defined above (wygroup2) Switch (config) # class-map wygroup2 Switch (config-cmap) # match access-group wy2 Switch (config-cmap) # exit 4. Define the policy Name and bind the class defined above to this policy (wyacl2) Switch (config) # policy-map wyacl2 Switch (config-pmap) # class wygroup2 Switch (config-pmap-c) # trust dscp Switch (config-pmap-c) # police 2048000 2048000 exceed-action drop 5. Apply the policy Switch (config) on the interface # interface f0/12 Switch (config-if) # service-policy output wyacl2 (output is required)