System appears bootmgr is missing solution, Dell Dell Server installation system requires special attention to the problem

System appears bootmgr is missing solution, Dell Dell Server installation system requires special attention to the problem

please pay attention to http://blog.csdn.net/aaa123524457

Reprint Please specify source: http://blog.csdn.net/aaa123524457/article/details/47058013

This article is for Dell r530 servers. Use only as a memo.

Installation system, just follow the prompts to be good. Here are only a few of the issues that need special attention in the process of loading the system: It is also a solution for the system to appear bootmgr is missing.

A few days ago just bought a powage r530 server from Dell's official website, the appearance of configuration RAID1, no system installed. So he installed himself.

Point 1 to note:

Server system can be installed with a USB stick, but the USB stick must be the way of the boot disk, the way to use PE is not installed system! The way of the so-called boot disk is to burn the ISO system files to a USB stick.

Point 2 to note:

System will not be found when the hard disk, you need to put the server's array card drive together to burn inside the USB flash drive.

Point 3 to note:

After you locate the system hard disk, you need to partition the hard disk. This time to pay attention to have a default very small partition, probably only 100M or 2G, this is the system to keep the boot information partition, is not able to delete!

The above three points are particularly important to note. Now, then, it appears that bootmgr is missing the problem;

please pay attention to http://blog.csdn.net/aaa123524457

Reprint Please specify source: http://blog.csdn.net/aaa123524457/article/details/47058013

The first time the USB flash drive system was installed successfully. The system then sees the partition (the one mentioned in point 3 above) that is reserved by the system. Looked very uncomfortable, so the partition was deleted!

As soon as the result is deleted, the problem arises! After rebooting the system has been the bootmgr is missing error, the method found on the web is not for the server system, simply does not work! Trying to reload the system is not possible!

The result is very helpless, can only reload the array card information, redo RAID1, the process is very slow, it takes one hours to complete; then the system can be re-installed!

So neither can delete that 100M partition, also can't hide it, stay in the system inside, look at the uncomfortable, how to do?

This can be resolved:

In the installation system, the partition of the step (note 3), the first division of other partitions, set aside the system disk partition space, such as 1T hard disk, 300G as the D disk, 500G as the e-disk, the remaining 200G as the system disk (c disk); First divide 300 and 5,002 partitions, The remaining 200 is in an unassigned state. Then select the system reservation partition (100m this), choose the way to expand, the 200G and come in, and then put the system into the partition inside it!

The picture is not retained, so just leave the process and use it only as a memo.

Please pay attention to http://blog.csdn.net/aaa123524457

Reprint Please specify Source: http://blog.csdn.net/aaa123524457/article/details/47058013

Copyright NOTICE: This article for Bo Master original article, without Bo Master permission not reproduced.

System appears bootmgr is missing solution, Dell Dell Server installation system requires special attention to the problem