| I will introduce GHOST7.0 or 7.5, which is different from the current version 8.0 or even 9.0. For example, you can place the backup file on the NTFS format partition for version 8.0; in WINDOWS 9.0, you can use the graphic interface to select the restoration and backup options. However, if the system cannot be started, you must use the boot disc of this version to start the computer and then perform the operation.
If you want to install an operating system on a computer, you must first ensure that the computer is started in a certain way. When you install 98 or ME, you usually start it with a boot disc.
To start the computer with a boot CD, you must first select the boot options in the BIOS. Usually press the DEL key after the boot to enter the BIOS settings interface.
Select 2nd "Advanced BIOS Settings" and press enter to find this item, press the page up or page down key to switch to CDROM, C,. The options on the current motherboard are not the same as those on this one. Generally, it is the First boot device, and there is only one startup method later. Set it to CDROM, the setting method is similar to the preceding one. In addition, the first item on this page is usually Virus Waraing (Virus Detection), which is set to Disabled. Otherwise, an error may be reported during the installation process.
After setting, Press Esc to return to the home page and select SAVE & exit setup to SAVE the settings and exit bios settings.
When the computer restarts, place a boot CD with DOS enabled into the optical drive, and the following interface will soon be displayed. The first option is to start the mode with the optical drive, and the second option is to start the mode without the optical drive.
A: drive letter
Assume that your ghost.exe is stored in the GHOST folder of the E disk, and enter the following commands in sequence:
E:
Cd ghost
Ghost
Each time you type a command to return to the car, the window shown in Figure 1 appears. Press enter to confirm. Then, select the Local → Partition → To Image menu in the window in Figure 2,
The hard disk selection window is displayed to start partitioning and backup. 3. Click the white hard disk Information bar in the window, select the hard disk, enter the window, and select the partition to operate (if there is no mouse, you can operate on the keyboard: TAB to switch, enter the Enter key to confirm and select the direction key ). 4.
|
In the pop-up window, select the backup storage directory path and enter the backup file name. 5. Note that the backup file name contains the GHO extension name. Next, the program will ask whether to compress the backup data and give three options: No indicates No compression, Fast indicates that the compression ratio is small, and the backup speed is faster, high means that the compression ratio is High, but the backup execution speed is quite slow. 6. Select the "Yes" button to back up the partitioned hard disk. 7.
The Ghost backup speed is quite fast and can be completed without waiting for a long time, 8. Backup files are stored in the specified directory with The GHO suffix. After the backup is complete, press enter to confirm and return to the GHOST Main Menu, 9. Exit if no other operations are performed.
[NextPage] Start the GHOST program as described at the beginning when restoring the system. To restore the backup Partition, select Local → Partition → From Image, 10 on the interface. In the pop-up window, select the restored backup file, 11
Then select the restored hard disk and partition, 12, 13, and 14. Click "Yes. The restoration screen is displayed at last, 16. After the restoration is complete, there will be two buttons: continue and restart the computer, the default is restart, 17, if no other operation to restart.
|
|
