Teach you how to DIY machine

In this era of high computer penetration, many people like to build their own computers, rather than take the assembly of computer configuration to the computer city directly to buy the assembly machine back, if it is directly to the merchant installed, directly to the assembly machine to bring back, oneself is lost a experience DIY machine fun opportunity, Some users may be afraid of their own installation is not good, do not worry, take a look at our steps to teach you how to assemble a computer.

The computer configuration is the old platform moved over, so did not explain how to install the CPU, CPU installation is actually quite simple, the main CPU on the two notches on the socket can be, should not be installed wrong! In fact, a computer's accessories are not many, nothing is CPU, motherboard, graphics card, memory, hard disk, Optical drive and other accessories.

First, install the power supply;

Second, the power is installed, then the chassis bezel installed first, and then put the motherboard into the chassis to the Zishing!

TT commander above this screw bit design is great, in the middle of the bulge, you can directly to the motherboard alignment good, very stable ah, let me feel no need to screw screws are all right, but the screws still want.

Third, the motherboard installed, and then you can install the video card, first plug the video card into the PCI graphics slot, and then the video card near the chassis with screws fixed.

Iv. after the installation of the graphics card after the next step is the memory installation, memory installation is very simple, the main note memory notch Mark and the motherboard notch mark alignment insert can, very simple.

Five, CPU, motherboard, video card, memory are installed, we can now connect the power cord to the accessories for the accessories connected to the power supply line. First plug the 24PIN in the power supply into the motherboard 24PIN slot, which is the motherboard power supply line:

Motherboard power supply connection number, and then the CPU power, look at your motherboard, is 8PIN on the combination of plug-in, like I only a 4PIN after the general CPU power is 4PIN.

Finally, we will connect the video card power, my video card is 6PIN interface, the following 2PIN is useless, if not enough words can be used with the card with the switch interface to the other power connector.

CD-ROM drive and hard disk installation is very simple, for the moment, the role of the optical drive is not large, so many installed friends will not choose the CD-ROM, so the installation of the CD-ROM is simple to mention here, the hard disk installation is more simple, first fixed the hard disk in the chassis of the hard disk holder, and then connected to the power

Six, the installation of the motherboard jumper

Motherboard jumper installation, is a lot of novice friends to learn the biggest pain, in fact, rookie is not dead in the cumbersome steps, but see the need to connect too many lines, did not try to take the first step to give up. But if you are careful to connect the jumper, you will find that it is not difficult, because the jumper and the motherboard is marked with a flag, the seat can be inserted. Actually very simple, we first know! These are all necessary for us.

First of all, we need to know that the main board jumper is the power on the chassis, reboot, hard disk, power drive indicator, chassis front audio, USB interface cable Connection to the operation of the motherboard, because we do not turn on or the data cable connected to the front of the chassis USB interface is carried out on the chassis, Therefore, the internal motherboard to the chassis of the corresponding jumper connection, first understand the chassis on the connection to the motherboard on the jumper.

Although the jumper is more, but the jumper and the motherboard generally have the letter abbreviation, one for the insertion can, in addition to the motherboard manual also has a detailed diagram connection instructions, do not understand the need to see friends.

As the USB3.0 began to popularize, so the general new computer chassis also has USB3.0 interface, if the motherboard support USB3.0, insert it into the motherboard corresponding location. Finally do not forget the front audio jumper, the use of anti-stay design, there is a missing needle in the middle, the interface that is no mouth, so do not plug the wrong, carefully observe the motherboard in line with the interface of the location can be.

Seven, the last simple introduction of the wiring of the hard disk: hard disk wiring is actually very simple, because the hard disk only 2 line access, one is from the power supply past the power line, and the other is by the host connected to the hard drive data cable.

Here the whole DIY machine is gone, then you can install the operating system, connect to the Internet, start surfing the internet.

        Note : More Exciting tutorials please follow the Triple computer tutorial section, triple Computer office group: 189034526 Welcome to join