Teach you how to install a wireless router! Friends don't have to ask for help!

Teach you how to install a wireless router! Friends don't have to ask for help!

1. First, connect the cables, for example, the telephone lines that enter the room outside, that is, the broadband lines, to the cat.(Note: The telephone line is a 2-core thin line ).

Connect the blue plug-in of the CAT and the wireless router with an 8-core network cable.

Finally, the 8-core network cable is connected to the NIC plug-in behind the computer trunk box. (Square plug-in)

2. Open your computer, right-click "Network Neighbor" on the desktop, click Properties, select local connection, and click Properties.The following dialog box is displayed:

Click properties to bring up another dialog box. Click "internet Protocol (TCP/IP)" and click Properties.

Enter the data of the corresponding IP address, sub-code mask, default gateway, preferred DNS server, and backup DNS server. Click OK. All the way to OK

3. Open your browser, enter "http: // 192.168.1.1" in the address bar, and press Enter.

The browser will pop up a dialog box asking you to enter the user name and password :()

In general, the user name is admin password is admin input after the point is determined (according to your wireless router brand, I use the TP-LINK WR840N ).

The wireless router interface () is displayed ():

Click the setting wizard. In the displayed dialog box, select "pppoe (ADSL virtual dialing) and click Next:

In the pop-up dialog box, enter the Internet account and password (that is, the broadband user name and password provided by China Telecom), and click Next.

Start to set Wireless Parameters, press set, wireless security options can select WPA-PSK, PSK password yourself add 8 numbers, but remember. (Other computers need to enter this password for wireless connection) and then click Next.

Last point completed

In this way, the wireless router configuration is complete.