[Technology] VMware installs Mac OS 10.6 snow leopard

Explanation:

1. No disk is installed

A: choose tools> disk tools. Then, perform the "erase" operation on your virtual hard disk.
Ii. Installation failed

A: The boot disk has been successfully installed. At this time, you mount the boot disk used during installation to the optical drive and restart it. Tab: Select Mac to enter the system.

3. Mac OS only supports SSCI Disks

4. Modifications made at the beginning of creation

A: After creating a virtual machine, you need to find a file with the extension. vmx file, open with notepad, find guestos = "freebsd-64" line, change the freebsd-64 In the quotes to darwin10, change to guestos = "darwin10", save the modified file. After modification, remember to remount it once.

5. Remove the software drive and change the optical drive format.

6. Install vmware_tools. After Entering Mac, mount it to Darwin. ISO, install it, and restart it.

6. Remember that AMD's CPU should not be overwhelmed. It is said that hardware is not supported.

7. If you have good character and patience, you can do it in general.

PS: Start the boot from the boot disk each time. Attach the boot disk to the boot page. Mount Mac OS. ISO to enable the Service properly.