Tenda routers Why input 192.168.1.1 not go to the router

To set up a router wireless internet, enter the 192.168.1.1 in the browser to the problem of not going to the router
Access to router IP (usually http://192.168.1.1 or HTTP://192.168.0.1/)
But what is the reason for not opening the Web page?

Let's see what causes the Router administration page to not open:

Check if input error causes no opening
Many netizens in the browser address bar in the wrong address, the result is not to go to the router, enter the following error address can not enter the router:
www.192.168.1.1
HTTP 192.168.1.1
192.168.1.0
192.168.11
http//192.168.1.1
http\\192.168.1.1
192.168.1.1
http:192.168.1.1
192.168.1..1
Www.192.168.1.1.com
192.168.1.1.1
http192.168.1.1
192.168.1.1.com
http.192.168.1.1
192.168.com
Www.192.168.com
HTTP 192.168.1.11
www192.168.1.1
Should be colon: rather than semicolon;: http;//192.168.1.1 ()
Space cannot appear in IP address: 192. 168.1. 1
IP address can not be a bit of the last number.: 192.168.1.1. ()
The IP address should be in half-width English dot number ".", you cannot use the Chinese period. or full corner point number:192. 168. 1. 1
http.//should be written as http://, with a colon: instead of a dot.: http.//192.168.1.1

The correct access method is input: http://192.168.1.1 or http://192.168.0.1 (HTTP can be omitted, that is, directly enter 192.168.1.1 or enter 192.168.0.1).
  Note that different brands of routers, the default IP access address is also not the same, and generally allow users to modify the default address.
Therefore, please refer to the instruction manual for the specific access address. The
also adds that the general default port is 80, so the access address omits the port (the full address is http://192.168.1.1),
If the port value is modified, the full write, such as http://192.168.1.1:8080, is required.
If you confirm that the address is not wrong, but still encounter 192.168.1.1 can not open how to do?

Check ping 192.168.1.1 is normal when not in 192.168.1.1, the performance of the input 192.168.1.1 in IE can not display the Web page, there may be a problem with network connectivity, we can use ping check: Click the Windows "Start" button, Select Program > Attachment > Command prompt, and enter "Ping 192.168.1.1" in the Open Command Prompt window (note that there is a space behind the ping, written directly to ping192.168.1.1 will not get the correct result) if the result shows a similar figure , which means that the ping is not reachable from your computer to the router.
 
Usually causes the ping to fail:
The router does not have power. For example, the power adapter is not plugged in, the router switch is not turned on, and so on. The router's LEDs will light up after PowerUp.
There is a problem with the network cable between the computer and the router, such as loss of Crystal head, network cable rupture, network card loss, etc. will cause unable to connect, of course, will not be able to land. Change the root network cable or access the router in another computer, if you can open a description of the network cable or network card problems. The
firewall prohibits access to router IP192.168.1.1. According to the different firewall software setting method, lifting the prohibition can. The
network settings are incorrect. For example, the computer's IP address, subnet mask, gateway, and other settings error can not connect the router. For specific settings, refer to the router specification or view the following setup methods.
If there is no problem with the ping, what about the login 192.168.1.1? This is to see if the user name/and password/correct is entered. No matter the user name or password any one error, you will encounter 192.168.1.1 problems.