Tengda (Tenda) FH903 router how to set

This article introduces Tengda (Tenda) FH903 wireless router connection, Internet settings, a new purchase (after the factory set up) Tengda FH903 wireless router, to achieve Internet connection, need to go through the following 4 steps: 1, set up computer IP address; 2, Connection Tengda FH903 router, 3, Tengda FH903 router Internet settings, 4, check the success of the settings.

　　Tengda (Tenda) FH903 router

Step one, set up the computer IP address

Before setting up Tengda FH903 router to surf the internet, you need to set the IP address of the computer to automatically obtain (dynamic IP), as shown in the following figure.

Set IP address to automatically get

　Step two, connect Tengda FH903 router

1, telephone line Internet: users need to prepare 2 network cable, a network cable used to connect ADSL Modem (Broadband cat) and Tengda FH903 Router WAN interface; Another network cable is used to connect the LAN interface between the computer and the router (either of the 1/2/3/4).

When the telephone line is connected to the Internet, the router connects correctly

2, Optical brazing: Users need to prepare 2 network cable, one of the network cable used to connect the light cat and the Tengda FH903 Router WAN interface, another network cable used to connect the computer and router LAN interface (any of the 1/2/3/4 can).

The proper way to connect a router when it is connected to the Internet

3, network cable households: users need to prepare 1 network cable, the first broadband operators to provide the household network cable inserted in the Tengda FH903 Router WAN interface, and then the preparation of this cable, a connection to the computer, the other end of the LAN connection router (1/2/3/4 any one can).

When the broadband network cable is connected to the Internet, the router connects correctly

Note the problem:

(1), in accordance with the appeal of the link Tengda FH903 router, the computer temporarily can not surf the Internet, when the router is set up, the computer automatically can access the Internet.

(2), many novice users often asked, so that the computer can not be connected after the Internet, how can I set up the router? Here to say: When setting up a router, do not need a computer to be able to access the Internet, just follow the above method to properly connect the router, the computer can enter the router settings interface, set up routers networking.

(3), pay attention to problems, to connect the cat and the router, the router and the computer network between the cable, must be normal use. If there is a problem with the network cable, you will not be able to login to the Tengda FH903 settings interface, or set up after the Internet.

Step three, set up Tengda FH903 router networking

1, Login Settings interface: In the browser input 192.168.0.1 return--> Enter the default password:admin--> click "OK".

Tengda FH903 Router Login interface

2, in the Jump page select "ADSL dial-up"--> input for broadband, broadband operators to provide the Internet account, Internet password--> Click "OK", as shown in the following figure

Tengda FH903 router, ADSL dial-up Internet settings

Note the problem:

(1), if you have a broadband account, broadband password, and when not using the router, the computer needs to use the "broadband connection" dial-up Internet access, then in the setting Tengda FH903 router Internet, you should choose: ADSL dialing, as shown above.

(2), if you do not have a broadband account, broadband password, and in the absence of the use of routers, the only need to set the computer IP address for automatic access, and then connect the broadband network cable to the computer's network interface, the computer can be online. When setting up Tengda FH903 router to surf the Internet, you should choose: Automatically obtain, detailed settings as shown in:

Click "Auto Get"--> "OK"

Tengda FH903 router, automatically get (dynamic IP) Internet settings

Click "Advanced Settings"

Access to the Advanced settings interface of the Tengda FH903 router

Click "Mac Clone"--> "Manual Cloning"--> "clone mac Address"--> "OK"

Clone MAC address on Tengda FH903 router

(3), if you do not have a broadband account, broadband password, but the broadband operator (network administrator) gives you IP address, subnet mask, Gateway, DNS, and in the case of not using a router, you need to manually fill out the IP address, subnet mask, provided by the broadband Operator (network administrator) in the local computer connection, Gateways and DNS.

Click on the "Advanced Settings" option,

Access to the Advanced settings interface of the Tengda FH903 router

Click on "Internet Settings"--> "Internet Mode" choice: static ip--> fill in the broadband operator to provide IP address, subnet mask, gateway, dns--> click "OK".

The static IP Internet setting on the Tengda FH903 router

Click "Mac Clone"--> "Manual Cloning"--> "clone mac Address"--> "OK"

Clone MAC address on Tengda FH903 router

　Step four, check that the settings are successful

Enter the advanced settings interface to Tengda FH903, click "Run Status" and view "WAN status", as shown in the following figure if the display is connected. Description Tengda FH903 Router Internet set up successfully, computer, mobile phone can through the FH903 router Internet.

Check that the Tengda FH903 router settings are successful

If the display is not connected, or if the connection indicates that the Internet setting for the Tengda FH903 router is unsuccessful, check the connection of the router, the choice of the Internet, the broadband account number and the correct password. If there is still a problem, please leave a message behind the article, the administrator will promptly answer.